Before I go to a mechanic.....HELP!!!
#1
Honda-Tech Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: wEsT of WattS...NoRth oF CompTon, CA
Posts: 4,946
Received 0 Likes
on
0 Posts
Before I go to a mechanic.....HELP!!!
Car: 2001 Civic DX
Problem: Car starts and after a couple of seconds it dies. It is plenty of gas.
Car was drien from LA to Costa Mesa and back yesterday with no problems. The wife leaves for works and comes back and says the car died. I tried giving it a jump. same problem. It has plenty of gas. Starts then dies.
What could the problem be?
Problem: Car starts and after a couple of seconds it dies. It is plenty of gas.
Car was drien from LA to Costa Mesa and back yesterday with no problems. The wife leaves for works and comes back and says the car died. I tried giving it a jump. same problem. It has plenty of gas. Starts then dies.
What could the problem be?
#5
Honda-Tech Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: wEsT of WattS...NoRth oF CompTon, CA
Posts: 4,946
Received 0 Likes
on
0 Posts
Re: Before I go to a mechanic.....HELP!!!
I was going to look on the ECU. Let me look at the cluster. BTW, is that ECU under the dash above the AC crap?
#6
Sanji
iTrader: (1)
Re: Before I go to a mechanic.....HELP!!!
Yes, but you don't need to remove the A/C equipment to get at it. You need to trim the plastic panel under the glove box (yes, that's per the instructions in the service manual). Then remove the glove box brace, and you'll be able to remove the ECU.
#7
Honda-Tech Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: wEsT of WattS...NoRth oF CompTon, CA
Posts: 4,946
Received 0 Likes
on
0 Posts
Re: Before I go to a mechanic.....HELP!!!
What is holding the ECU in place? I have the glove box removed. I can see the ECU, but what is holding it in place so i can't take it out. Is there bolts or screws holding a bracket or something?
Trending Topics
#10
Honda-Tech Member
Join Date: May 2011
Location: miami, fl
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: Before I go to a mechanic.....HELP!!!
Aside from what others are suggesting check your voltage with the engine running if it starts with a jump but then dies maybe the alternator is not charging
#11
Honda-Tech Member
Join Date: Sep 2004
Location: Columbus, Ohio, USa
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Re: Before I go to a mechanic.....HELP!!!
You won't get anywhere pulling the ECU.
You need to rent an OBII scanner from the parts store and check the car for codes.
You need to rent an OBII scanner from the parts store and check the car for codes.
#12
I ♥ OLD SKOOL
Join Date: Jul 2006
Location: Riverside, CA, USA
Posts: 1,839
Likes: 0
Received 0 Likes
on
0 Posts
Re: Before I go to a mechanic.....HELP!!!
#13
Re: Before I go to a mechanic.....HELP!!!
What happens if you have no CEL codes!!!!. I tested the battery and replaced it with brand new battery and battery cables trying to jump start, it will turnover and die just as fast.
I have noticed that the fuel pressure is very low. could that also be your problem. Readings are not normal. (less than 5pi).
what more could i look for? its 03 civic ex4dr
I have noticed that the fuel pressure is very low. could that also be your problem. Readings are not normal. (less than 5pi).
what more could i look for? its 03 civic ex4dr
#17
Honda-Tech Member
Thread Starter
iTrader: (3)
Join Date: Feb 2003
Location: wEsT of WattS...NoRth oF CompTon, CA
Posts: 4,946
Received 0 Likes
on
0 Posts
Re: Before I go to a mechanic.....HELP!!!
I took it to one mechanic and they couldnt figure out what was wrong. Said it was probably something wrong with the anti theft. Took it to Honda and they said the timing jumped. I asked the guy if that was the cause because the car kept trying to be started over and over or the ECU or fuel pump gone bad. I told them take the head off and I will have it inspected and fixed. Hopefully, once it is back together that will solve the problem. I just need the wife to get one more year out of this car before we get a new one.
#19
Re: Before I go to a mechanic.....HELP!!!
Gen3, Tunner, yes i replaced a fuel pump today and car started just fine.
its 03civic ex. Previously, i had only replaced a fuel filter/strainer.
$200 later the problem is fixed. cars running great.( have only driven 10-15mi yet) but works.
its 03civic ex. Previously, i had only replaced a fuel filter/strainer.
$200 later the problem is fixed. cars running great.( have only driven 10-15mi yet) but works.
Thread
Thread Starter
Forum
Replies
Last Post