02 Civic EX service manual in PDF format?
#1
02 Civic EX service manual in PDF format?
Does anyone have or know where I can find 02 civic service/shop manual in a pdf format?
I need to replace my RL abs sensor, but i want to know how to test it first before i run to the dealer and get a new one/ I got code 17 from the ABS light after connecting pin #4 and #9
Thanks!
I need to replace my RL abs sensor, but i want to know how to test it first before i run to the dealer and get a new one/ I got code 17 from the ABS light after connecting pin #4 and #9
Thanks!
#2
Re: 02 Civic EX service manual in PDF format?
Sorry, but we don't offer free copies of copyrighted material.
Edit:
1. Disconnect the ABS control unit 31-pin connector and start the engine.
2. Measure the voltage between terminal #9 (+) and a body ground.
Is there 0.3 volts or more?
Yes - Repair the short in the (+) circuit wire between the ABS unit and the wheel sensor.
No - Go to step 3
3. Turn the ignition off, and check for continuity between terminal #9 (+) and a body ground.
Is there continuity?
Yes - Go to step 4
No - Go to step 5
4. Disconnect the 2-pin harness connector from the wheel sensor, then check for continuity between the positive and negative terminals of the harness and a body ground.
Is there continuity?
Yes - Repair the short in the positive or negative circuit wire between the ABS unit and the wheel sensor.
No - Replace the wheel sensor.
5. Check the resistance between the wheel sensor (+) and (-)
Is the resistance 450 - 2,000 ohms?
Yes - Check for a loose ABS control unit 31-pin connector. If necessary, swap the ABS control unit with a known-good one and recheck.
No - Go to step 6
6. Disconnect the wheel sensor 2-pin harness connector, and check the resistance between the (+) and (-) terminals of the wheel sensor.
Is the resistance between 450 - 2,000 ohms?
Yes - Repair open in the (+) or (-) circuit wire, or short between the (+) circuit wire and the (-) circuit wire between the ABS unit and the wheel sensor.
No - Replace the wheel sensor.
Edit:
1. Disconnect the ABS control unit 31-pin connector and start the engine.
2. Measure the voltage between terminal #9 (+) and a body ground.
Is there 0.3 volts or more?
Yes - Repair the short in the (+) circuit wire between the ABS unit and the wheel sensor.
No - Go to step 3
3. Turn the ignition off, and check for continuity between terminal #9 (+) and a body ground.
Is there continuity?
Yes - Go to step 4
No - Go to step 5
4. Disconnect the 2-pin harness connector from the wheel sensor, then check for continuity between the positive and negative terminals of the harness and a body ground.
Is there continuity?
Yes - Repair the short in the positive or negative circuit wire between the ABS unit and the wheel sensor.
No - Replace the wheel sensor.
5. Check the resistance between the wheel sensor (+) and (-)
Is the resistance 450 - 2,000 ohms?
Yes - Check for a loose ABS control unit 31-pin connector. If necessary, swap the ABS control unit with a known-good one and recheck.
No - Go to step 6
6. Disconnect the wheel sensor 2-pin harness connector, and check the resistance between the (+) and (-) terminals of the wheel sensor.
Is the resistance between 450 - 2,000 ohms?
Yes - Repair open in the (+) or (-) circuit wire, or short between the (+) circuit wire and the (-) circuit wire between the ABS unit and the wheel sensor.
No - Replace the wheel sensor.
Last edited by It Wasn't Me; 08-18-2010 at 12:42 PM.
#4
Re: 02 Civic EX service manual in PDF format?
5. Check the resistance between the wheel sensor (+) and (-)
Is the resistance 450 - 2,000 ohms?
Yes - Check for a loose ABS control unit 31-pin connector. If necessary, swap the ABS control unit with a known-good one and recheck.
No - Go to step 6
6. Disconnect the wheel sensor 2-pin harness connector, and check the resistance between the (+) and (-) terminals of the wheel sensor.
Is the resistance between 450 - 2,000 ohms?
Yes - Repair open in the (+) or (-) circuit wire, or short between the (+) circuit wire and the (-) circuit wire between the ABS unit and the wheel sensor.
No - Replace the wheel sensor.
Is the resistance 450 - 2,000 ohms?
Yes - Check for a loose ABS control unit 31-pin connector. If necessary, swap the ABS control unit with a known-good one and recheck.
No - Go to step 6
6. Disconnect the wheel sensor 2-pin harness connector, and check the resistance between the (+) and (-) terminals of the wheel sensor.
Is the resistance between 450 - 2,000 ohms?
Yes - Repair open in the (+) or (-) circuit wire, or short between the (+) circuit wire and the (-) circuit wire between the ABS unit and the wheel sensor.
No - Replace the wheel sensor.
Which terminal is needed in steps 2 and 3 for the FRONT LEFT sensor (code 13)? I haven't been able to turn up the wiring diagram for this 31-pin connector.
#5
Re: 02 Civic EX service manual in PDF format?
Step 5 and 6 appear to be the same (the 2-pin harness was disconnected in step 4 so not sure why they state to do so again in step 6)
Which terminal is needed in steps 2 and 3 for the FRONT LEFT sensor (code 13)? I haven't been able to turn up the wiring diagram for this 31-pin connector.
Which terminal is needed in steps 2 and 3 for the FRONT LEFT sensor (code 13)? I haven't been able to turn up the wiring diagram for this 31-pin connector.
DTC-13 = Terminal #7 (blue/orange) LFS
DTC-15 = Terminal #2 (green/yellow) RRS
DTC-17 = Terminal #9 (yellow/red) LRS
Thread
Thread Starter
Forum
Replies
Last Post
juniordc2
Acura TL, RL & ZDX
2
01-04-2006 06:55 PM