SSR WHEEL PIC THREAD
10-27-2012, 07:36 AM
#7801
Honda-Tech Member
Join Date: Nov 2008
Location: daytona beach, fl
Posts: 1,710
Likes: 0
Received 0 Likes
on
0 Posts
Re: SSR WHEEL PIC THREAD
^ thanks for info. Any chance you know if the bore of the sp1's is same as the mk2R? Only 2 of my caps will fit bore. Though i think the thick paint from a repaint may be the prob.
What might those caps be worth in 9.5/10 condition? Only a few nicks were 1 fell out of hand while trying to tap on with rubber mallet
What might those caps be worth in 9.5/10 condition? Only a few nicks were 1 fell out of hand while trying to tap on with rubber mallet
10-27-2012, 07:53 AM
#7802
Re: SSR WHEEL PIC THREAD
^ thanks for info. Any chance you know if the bore of the sp1's is same as the mk2R? Only 2 of my caps will fit bore. Though i think the thick paint from a repaint may be the prob.
What might those caps be worth in 9.5/10 condition? Only a few nicks were 1 fell out of hand while trying to tap on with rubber mallet
What might those caps be worth in 9.5/10 condition? Only a few nicks were 1 fell out of hand while trying to tap on with rubber mallet
As for value, I'd say $50 - $100 for the center caps.
10-29-2012, 12:32 AM
#7805
Honda-Tech Member
Join Date: Oct 2012
Location: Melbourne, Australia
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Re: SSR WHEEL PIC THREAD
please say yes, if they're locked on and don't have a key i'll be screwed right?!
Originally Posted by Brice.Hayden
Looking for center caps
http://auctions.search.yahoo.co.jp/s...merce&slider=0
10-29-2012, 04:29 AM
#7806
Re: SSR WHEEL PIC THREAD
No, the key number is stamped (in the metal) on the underside of the center cap when screwed off. It will be a small 3 digit number. Sometimes a little corrosion hides it, so take some 0000 steel wool and clean the back of the cap to reveal the stamp. If you can unscrew the cap from the face, your cap is not "locked"...there is also an "open" and "lock" designation on the front of the cap where the key is placed. Hope that helps...
10-31-2012, 06:36 AM
#7808
Honda-Tech Member
Re: SSR WHEEL PIC THREAD
http://www.flickr.com/photos/61173484@N02/6744032605/
http://www.flickr.com/photos/61173484@N02/6743972767/
echm 2011, not my car.
http://www.flickr.com/photos/61173484@N02/6743972767/
echm 2011, not my car.
11-03-2012, 10:59 AM
#7818
war all of the time......
iTrader: (12)
Join Date: May 2003
Location: right over here, NC
Posts: 12,564
Likes: 0
Received 0 Likes
on
0 Posts
Re: SSR WHEEL PIC THREAD
ur very welcome!!! wish i could find the keys i need lol, no luck yet. u find somewhere to get new gold hardware at? i had a place, but i cant find the link
11-03-2012, 02:30 PM
#7820
Re: SSR WHEEL PIC THREAD
I dont like the way reversed staggered looks...not gonna do that. Besides, the width/offset are minimal differences.
No, these are blackstar's ex-c's. Gerald was selling 16x7 4x100.
Thanks Mike, I have a thing for fins too. To me, its the best wheel that SSR ever produced. I am going to sell the 4x114 faces when I clean them up and sell my current standard reverse barrels and hardware. Then find my Super Mesh. 
I knew that the key for these caps was much more common than others, I found 4 people with them. The OG gold on the bolts is near mint, just going to re-clear them. Keep me posted on other things you get in brotha!
I knew that the key for these caps was much more common than others, I found 4 people with them. The OG gold on the bolts is near mint, just going to re-clear them. Keep me posted on other things you get in brotha!
11-04-2012, 01:48 PM
#7825
Honda-Tech Member
Join Date: Dec 2004
Location: Mississauga, Ontario, Canada
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts