Some pics of my JDM DC2 96spec
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: City of Stars
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
Some pics of my JDM DC2 96spec
<FONT SIZE="5">CURRENT PICS AS OF 3/1/05</FONT>
ENGINE: The engine is a basically stock B18C 11:1 compression. Drop in K&N air filter. FEEL'S 4-2-1 1pc. header with 2.5in collector, FEEL'S test pipe with heat shields, FEEL'S cat-back exhaust(2.5in piping diameter). NGK R09 silicone spark plug wires, Odyssey lightweight race battery. Stainless-steel clutch line. Stock ITR transmission w/ LSD. Toda Flywheel and clutch. Stock ECU. Fluidyne race radiator. Rear race pipe(2.5 dolphin tail pipe replaces axle back section).
SUSPENSION/BRAKES: Spoon(yellow) dampers, Spoon springs(linear front/progressive rear...old skool black ones). Spoon front lower tie bar, OEM rear lower tie bar, Spoon rear strut tower bar, OEM ITR front tower bar, EM Racing C-Pillar bar, trunk floor bar and trunk wall bar. JDM 98spec ITR rear upper control arms. Custom front brake setup: Rotora slotted front rotors(95 VTEC Prelude 11in), 98 ITR calipers, Axxis Ultimate front pads. This front setup required me to install 5mm Eibach wheel spacers and ARP extended wheel studs. The rear is factory with the exception of AEM brake pads. Motul 5.1 brake fluid used.
WHEEL/TIRE/EXTERIOR: Factory 4x114.3 96spec wheels with Advan Neova AD07 tires, Spoon carbonfiber hood. Recently decided to strip the clear coat on the hood since it started to peel. Dry carbon rocks!!
INTERIOR: Factory interior, gutted rear. Momo 12.6in monte carlo w/ NRG quick release, ULTRA speed meter. TAKATA 4pt. racing harness. Eclipse CD player, Pioneer speakers.
-Brandon
Modified by 110 South at 11:47 PM 3/1/2005
Modified by 110 South at 1:49 PM 3/2/2005
ENGINE: The engine is a basically stock B18C 11:1 compression. Drop in K&N air filter. FEEL'S 4-2-1 1pc. header with 2.5in collector, FEEL'S test pipe with heat shields, FEEL'S cat-back exhaust(2.5in piping diameter). NGK R09 silicone spark plug wires, Odyssey lightweight race battery. Stainless-steel clutch line. Stock ITR transmission w/ LSD. Toda Flywheel and clutch. Stock ECU. Fluidyne race radiator. Rear race pipe(2.5 dolphin tail pipe replaces axle back section).
SUSPENSION/BRAKES: Spoon(yellow) dampers, Spoon springs(linear front/progressive rear...old skool black ones). Spoon front lower tie bar, OEM rear lower tie bar, Spoon rear strut tower bar, OEM ITR front tower bar, EM Racing C-Pillar bar, trunk floor bar and trunk wall bar. JDM 98spec ITR rear upper control arms. Custom front brake setup: Rotora slotted front rotors(95 VTEC Prelude 11in), 98 ITR calipers, Axxis Ultimate front pads. This front setup required me to install 5mm Eibach wheel spacers and ARP extended wheel studs. The rear is factory with the exception of AEM brake pads. Motul 5.1 brake fluid used.
WHEEL/TIRE/EXTERIOR: Factory 4x114.3 96spec wheels with Advan Neova AD07 tires, Spoon carbonfiber hood. Recently decided to strip the clear coat on the hood since it started to peel. Dry carbon rocks!!
INTERIOR: Factory interior, gutted rear. Momo 12.6in monte carlo w/ NRG quick release, ULTRA speed meter. TAKATA 4pt. racing harness. Eclipse CD player, Pioneer speakers.
-Brandon
Modified by 110 South at 11:47 PM 3/1/2005
Modified by 110 South at 1:49 PM 3/2/2005
#6
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: City of Stars
Posts: 529
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some pics of my JDM DC2 96spec (BlueIntegraBoy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Slammed_CX »</TD></TR><TR><TD CLASS="quote">SO HOT... Is this the car that was in Honda Tuning a while back?</TD></TR></TABLE>
Yes it is the same car. Thanks for the feedback! <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueIntegraBoy »</TD></TR><TR><TD CLASS="quote">Isn't it still for sale?</TD></TR></TABLE>
Yes it is still for sale....looking for a good home
Yes it is the same car. Thanks for the feedback! <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueIntegraBoy »</TD></TR><TR><TD CLASS="quote">Isn't it still for sale?</TD></TR></TABLE>
Yes it is still for sale....looking for a good home
Trending Topics
#15
Honda-Tech Member
Join Date: Mar 2004
Location: U of Washington
Posts: 1,437
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some pics of my JDM DC2 96spec (Mires)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mires »</TD></TR><TR><TD CLASS="quote">Very nice! </TD></TR></TABLE>
#19
My car's twin brother from another mother. Mine's black.
How do you like the FEEL's exhaust? I have a chance to get the full CAT back system for US$250. (Used from a friend's car) It has a distinctive burble and sounds really deep. But not sure if it's better than my Mugen twin loop..
How do you like the FEEL's exhaust? I have a chance to get the full CAT back system for US$250. (Used from a friend's car) It has a distinctive burble and sounds really deep. But not sure if it's better than my Mugen twin loop..