rim experts....
#1
Honda-Tech Member
Thread Starter
rim experts....
Ok..Im seriously considering buying Work equip 03 in black with 15x8 rims with 2" deep lip.I just wanna know what offset I should get ? The car is a 1991 crx si.
I dont wanna order rims unless I know 100% that it will be ok.
I will be using 195/50 15 tires, so its gonna stretch a bit over the rim.
Right now I have 15x7 et 35 with no problems at all.
Here's some pics of a car with similar style wheels I want in 15x8.
I dont wanna order rims unless I know 100% that it will be ok.
I will be using 195/50 15 tires, so its gonna stretch a bit over the rim.
Right now I have 15x7 et 35 with no problems at all.
Here's some pics of a car with similar style wheels I want in 15x8.
#3
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2005
Location: from the 704 to the 919
Posts: 5,476
Likes: 0
Received 0 Likes
on
0 Posts
Re: rim experts.... (soundbomber)
Not trying to threadjack, but I was just about to make the same thread but I figure it'd be more appropriate to just post here instead of wasting bandwidth. I too have been looking into getting a set of Equips and want to be able to keep my car dumped without worrying too much about rubbing. I don't use a camber kit so keep in mind the wheels will tilt inwards. I'm not about to spend $1500+ on a set of wheels either if I'm not 100% set on the offset.
I can remove this post if you want, but in the mean time: *subscribed*
I can remove this post if you want, but in the mean time: *subscribed*
#4
Honda-Tech Member
Join Date: May 2004
Location: BAY AREA/OC
Posts: 4,849
Likes: 0
Received 0 Likes
on
0 Posts
Re: rim experts.... (soundbomber)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by soundbomber »</TD></TR><TR><TD CLASS="quote">get out a ruler, a pencil and some paper and find out.</TD></TR></TABLE>
#7
Honda-Tech Member
Join Date: Aug 2001
Location: Alabama
Posts: 5,430
Likes: 0
Received 0 Likes
on
0 Posts
Re: rim experts.... (shynop)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shynop »</TD></TR><TR><TD CLASS="quote">hold off on the works and move out from underneath your moms tittys </TD></TR></TABLE>
Trending Topics
#8
Honda-Tech Member
Thread Starter
Re: rim experts.... (shynop)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shynop »</TD></TR><TR><TD CLASS="quote">hold off on the works and buy the ferrari </TD></TR></TABLE>
'RARRI IS SOLD
'RARRI IS SOLD
#11
Try this...
http://marksink.com/tire_wheel_offset/offset.html
It's not gonna be totally accurate but close. Like the other guys said, bust out a ruler see how much room you have to play with and how much camber you plan on running.
http://marksink.com/tire_wheel_offset/offset.html
It's not gonna be totally accurate but close. Like the other guys said, bust out a ruler see how much room you have to play with and how much camber you plan on running.
#12
Re: rim experts.... (Rob.)
#13
Honda-Tech Member
iTrader: (1)
Join Date: May 2003
Location: SO Cal
Posts: 8,570
Likes: 0
Received 0 Likes
on
0 Posts
Re: (moo moo)
u would have to figure out what u would want O disk all around or Adisk
O disc= 2 step lip
a disc= singal lip
if u look on the work super wheel website u can download the Adobe file of what custome offsets they can come in I WOULDNT SUGEST a 15x8 with a lower offset of +19 if ur gonna ride dump and its not like u have alot to pick from in O Disc the lowest offset u could go is +19 then it goes down into the 9's 8's 7's ect...
O disc= 2 step lip
a disc= singal lip
if u look on the work super wheel website u can download the Adobe file of what custome offsets they can come in I WOULDNT SUGEST a 15x8 with a lower offset of +19 if ur gonna ride dump and its not like u have alot to pick from in O Disc the lowest offset u could go is +19 then it goes down into the 9's 8's 7's ect...
#14
Honda-Tech Member
Thread Starter
Re: rim experts.... (Mr.RHTuner)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.RHTuner »</TD></TR><TR><TD CLASS="quote">your in the wrong section rob
post here
https://honda-tech.com/zeroforum?id=56</TD></TR></TABLE>
I DID. But no one looks there.
post here
https://honda-tech.com/zeroforum?id=56</TD></TR></TABLE>
I DID. But no one looks there.
#15
Honda-Tech Member
Thread Starter
Re: (HeyMikeyyyy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HeyMikeyyyy »</TD></TR><TR><TD CLASS="quote">u would have to figure out what u would want O disk all around or Adisk
O disc= 2 step lip
a disc= singal lip
if u look on the work super wheel website u can download the Adobe file of what custome offsets they can come in I WOULDNT SUGEST a 15x8 with a lower offset of +19 if ur gonna ride dump and its not like u have alot to pick from in O Disc the lowest offset u could go is +19 then it goes down into the 9's 8's 7's ect...</TD></TR></TABLE>
hey thanks.. so the car I posted , what size rin does he have and what offset does he have ? I want the 2" lip.. what do you recommend ?
O disc= 2 step lip
a disc= singal lip
if u look on the work super wheel website u can download the Adobe file of what custome offsets they can come in I WOULDNT SUGEST a 15x8 with a lower offset of +19 if ur gonna ride dump and its not like u have alot to pick from in O Disc the lowest offset u could go is +19 then it goes down into the 9's 8's 7's ect...</TD></TR></TABLE>
hey thanks.. so the car I posted , what size rin does he have and what offset does he have ? I want the 2" lip.. what do you recommend ?
#16
Senior Member
Join Date: Oct 2002
Location: Rancho Cucamonga, CA, USA
Posts: 6,208
Likes: 0
Received 1 Like
on
1 Post
Re: rim experts.... (Rob.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rob. »</TD></TR><TR><TD CLASS="quote">I guess no one is a rim expert. </TD></TR></TABLE>
each car has their own "sizing". offset depends on the car and width you're using.
you just need to take out a ruler and start measuring.
Disc Face has alot to do with the look too. Then there's step lip and reverse lip.
judging by those pictures; i'm going to take a wild guess and say those are 15x8 +10
I think that green civic has 15x6.5 +19 (or +25)
Find someone with 15x8 +0 wheels. Try them on your car and start from there.
the 01 has 3 disc: 0disk, Adisk, Rdisk: http://www.work-wheels.co.jp/w....html#
each car has their own "sizing". offset depends on the car and width you're using.
you just need to take out a ruler and start measuring.
Disc Face has alot to do with the look too. Then there's step lip and reverse lip.
judging by those pictures; i'm going to take a wild guess and say those are 15x8 +10
I think that green civic has 15x6.5 +19 (or +25)
Find someone with 15x8 +0 wheels. Try them on your car and start from there.
the 01 has 3 disc: 0disk, Adisk, Rdisk: http://www.work-wheels.co.jp/w....html#
#19
Honda-Tech Member
iTrader: (1)
Join Date: May 2003
Location: SO Cal
Posts: 8,570
Likes: 0
Received 0 Likes
on
0 Posts
Re: rim experts.... (Rob.)
NRG IS CORECT!!!!
but if i was gonna buy some equips i would do 15x7 in a +19 offset in O disc
if ur gonna slam it some real fender rolling would be key other then that 15x8 0 offset no way in hell can u rock that **** on a honda with out flares and to be honest with u the lowest i have ever gone is a +5 offset and straight looked like i just drove out of east LA son!!! and that i was where my fenders were pulled to where it was tot he limit of it
I COULD NOT TURN!!!!
but if i was gonna buy some equips i would do 15x7 in a +19 offset in O disc
if ur gonna slam it some real fender rolling would be key other then that 15x8 0 offset no way in hell can u rock that **** on a honda with out flares and to be honest with u the lowest i have ever gone is a +5 offset and straight looked like i just drove out of east LA son!!! and that i was where my fenders were pulled to where it was tot he limit of it
I COULD NOT TURN!!!!
#20
Honda-Tech Member
Thread Starter
Re: (HeyMikeyyyy)
is this ok ?
Current Wheel Width 7" Current Wheel Offset +35
New Wheel Width 8" New Wheel Offset +19
Your new wheel will have the following chracteristics:
The clearance from stut housing to the inside of the wheel will be 3mm MORE
The outside edge of the wheel will EXTEND an extra 29mm
Current Wheel Width 7" Current Wheel Offset +35
New Wheel Width 8" New Wheel Offset +19
Your new wheel will have the following chracteristics:
The clearance from stut housing to the inside of the wheel will be 3mm MORE
The outside edge of the wheel will EXTEND an extra 29mm
#21
Honda-Tech Member
Join Date: Jun 2005
Location: DUFF GARDENS, CA, USA A OK
Posts: 14,536
Likes: 0
Received 0 Likes
on
0 Posts
Re: rim experts.... (Rob.)
well i had the work ewing emotions, they were 15x7+25 and i ran 195/50/15s and the car was fairly "dumped" and i only rubbed a little bit while making u-turns...but if u dont wanna worry about rubbing at all id just suggest a 15x7+38 or a 15x7+32 i wouldnt really go anywhere lower then that
#22
Senior Member
Join Date: Oct 2002
Location: Rancho Cucamonga, CA, USA
Posts: 6,208
Likes: 0
Received 1 Like
on
1 Post
Re: (Rob.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rob. »</TD></TR><TR><TD CLASS="quote">is this ok ?
Current Wheel Width 7" Current Wheel Offset +35
New Wheel Width 8" New Wheel Offset +19
Your new wheel will have the following chracteristics:
The clearance from stut housing to the inside of the wheel will be 3mm MORE
The outside edge of the wheel will EXTEND an extra 29mm</TD></TR></TABLE>
alright. use a ruler. go measure your current wheels. add 29MM to the front of the wheel. and now add 3MM to the rear of the wheel. it gives you the idea what a +19 will be at.
Current Wheel Width 7" Current Wheel Offset +35
New Wheel Width 8" New Wheel Offset +19
Your new wheel will have the following chracteristics:
The clearance from stut housing to the inside of the wheel will be 3mm MORE
The outside edge of the wheel will EXTEND an extra 29mm</TD></TR></TABLE>
alright. use a ruler. go measure your current wheels. add 29MM to the front of the wheel. and now add 3MM to the rear of the wheel. it gives you the idea what a +19 will be at.
#24
Honda-Tech Member
Thread Starter
Re: rim experts.... (Rob.)
sicc 83 has the wheels (15x8 +13 offset)
+19 offset on my crx will work perfectly, but only +10 and +23 are offered with
0 disc is the 2" lip...
Modified by Rob. at 10:06 PM 8/7/2006
+19 offset on my crx will work perfectly, but only +10 and +23 are offered with
0 disc is the 2" lip...
Modified by Rob. at 10:06 PM 8/7/2006