PSU

iTrader: (2)

I've searched, but only found mainly For Sale threads and one picture post from Dennis *b2finity*, but his was really old.

I really want to see them in a car.

Post your sliders/rails as well and also your opinion on the seats.

PSU

iTrader: (2)

SuperSi

I would get these but there not FIA approved

PSU

iTrader: (2)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SuperSi &raquo;</TD></TR><TR><TD CLASS="quote">I would get these but there not FIA approved </TD></TR></TABLE>

ahh, i figured they were sort of cheap for a reason.

E46Kid

They look alright

NTGR8D

Got them during a trade for my Chargespeed kevlar seat. The seat is very comfortable, I had the large version first which alot of my bigger friends were able to fit in, and they liked how it felt. I switched to the small version and the bolstering holds great.

If you want the seat to sit low, get the low position rails from any of the companies that make them. I needed a little more height for autocross rather than being able to see barely outside the window like some other low position seat rails so I went with stock refabricated seat brackets and sliders with Sparco side mounts.

PSU

iTrader: (2)

thanks man. looks great! ^^

NotoriousEK

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SuperSi &raquo;</TD></TR><TR><TD CLASS="quote">I would get these but there not FIA approved </TD></TR></TABLE>

what does that mean?

GUILOTINE

old seats i just sold

DOMKID

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GUILOTINE &raquo;</TD></TR><TR><TD CLASS="quote">old seats i just sold

</TD></TR></TABLE>

why did you sell? how did you like them?

GUILOTINE

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Felix. &raquo;</TD></TR><TR><TD CLASS="quote">

why did you sell? how did you like them?</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SuperSi &raquo;</TD></TR><TR><TD CLASS="quote">... there not FIA approved </TD></TR></TABLE>

crapanese

i want these seats also but i dont even know where to get them :\ or if ill fit in them

GUILOTINE

I'm a "38 waist and fit nicely in the wide ones

just Touge

I had one and liked it too. I sold it due to the fact I need reclinable cause I use the back for da kids! Good fit, and I used a Bride rail which I have for sale still.

nY's FiNeSt

pics suck but whatever





*edit* i have the non-fat bastard version for my skinny ***
i really like the seat, im using a memory fab rail and there are 3 height adjustments, if you've ever sat in a del sol seat in an EG its lower than that so you sit nice, i would've gotten a passenger side one but the girlie would have a fit getting in and out of it everytime lol

PSU

iTrader: (2)

thanks guys!

nY's FiNeSt, that's the same setup i plan on running. a buddy club driver with a del Sol passenger.

i'm a 40 waist so hopefully i'll be fine in the wide version.

PSU

iTrader: (2)

up for more pics

4doorjdmwhore

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GUILOTINE &raquo;</TD></TR><TR><TD CLASS="quote">I'm a "38 waist and fit nicely in the wide ones</TD></TR></TABLE>

Question. Does every place that carries Buddy Club seats carry both the "wide" as well as regular versions? I don't know if I would be cormfortable in the regular seats.

GUILOTINE

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by i_rock_RVCA &raquo;</TD></TR><TR><TD CLASS="quote">

Question. Does every place that carries Buddy Club seats carry both the "wide" as well as regular versions? I don't know if I would be cormfortable in the regular seats.</TD></TR></TABLE>

if the are a buddy club dealer they will be able to carry both. Honestly unless your under a "32 waist go with the wide. My homie was a "32 and barely fit in the regular seats

4doorjdmwhore

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GUILOTINE &raquo;</TD></TR><TR><TD CLASS="quote">

if the are a buddy club dealer they will be able to carry both. Honestly unless your under a "32 waist go with the wide. My homie was a "32 and barely fit in the regular seats </TD></TR></TABLE>

thanks dude that's what I figured...

PSU

iTrader: (2)

these small seats suck for us bigger people.

MonkeyPuzzle

Has everyone mounted these with solid rails, or has anyone mounted them with sliders.

I really love the look of the seat, I dont mind them not being reclindable but thye would need to slide as I am 5'8' and my brother is over 6'

Anyone with sliders? Success?

PSU

iTrader: (2)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MonkeyPuzzle &raquo;</TD></TR><TR><TD CLASS="quote">Has everyone mounted these with solid rails, or has anyone mounted them with sliders.

I really love the look of the seat, I dont mind them not being reclindable but thye would need to slide as I am 5'8' and my brother is over 6'

Anyone with sliders? Success?</TD></TR></TABLE>

memoryfab sells the rails/sliders for $185 each and i heard they are lower than del Sol seats

saintana

How are you tall people are liking this seat? I am considering buying one(being 6'3", 215lbs, 36 waist) but am concerned on the harness holes being to low for tall people, like it happens with the Recaro Pole-Positions. Any inputs?

Fabian@delsol

I'm 1,76cm high and waist 98cm, 92kg .... so I think the wider version would be better? :-P