juniornapeahi

I'm having an issue with my brakes. I replaced the brake calipers, brake pads as well as the Master Cylinder. Now, my TSC, ! and Brake dash lights are ON. When I try to bleed the brakes, I only have pressure on my FL and RR brakes. The FR and RL brakes have no pressure. Not sure what the issue is, did not have this problem before I changed the calipers and brake pads.. How do I know if its a bad proportioning valve or something else?

Thank You

BLKFLSH

This link might help to get the lights off, but the "no pressure" issue sounds like the master cylinder or proportioning valve.
http://www.driveaccord.net/forums/sh...78&postcount=5

juniornapeahi

I replaced the Master Cylinder, so I sounds like it may be my proportioning valve. Is there a way to overhaul or restore the proportioning valve? Or it just needs to be replaced with a new one? Is the proportioning valve the same as this:

http://www.hondapartsunlimited.com/a...er=46470s5te01

#26 - 46470-S5T-E01 JOINT, FOUR-WAY

juniornapeahi

I replaced the master cylinder and the proportioning valve. I now I have pressure on all 4 tires. But now when I press the brakes it doesnt release the presssure and all 4 tires lock and my TCS light comes on. The only way I can release the pressure is if I bleed the brakes. When I do bleed the brakes with the car off, the pressure applies to the brakes and when I let the brakes go it also releases the pressure on the brakes. It seems like I only have the problem with tires locking when I start the car up and the TCS lights come on. I thought it coud of been a problem with the calipers, but those have also been replaced. Any ideas of what else it could be?

VeeSykkz

sounds like ABS problems. Have you pulled codes?

juniornapeahi

Yes, I got NO CODES FOUND, not sure what else to do. Thank you for replying

johnsc2235

Tow it to a dealer. It may have an issue with the vsa...

juniornapeahi

Was hoping to avoid taking to the dealer because I have no money to tow it there and no money for them to check on it.

juniornapeahi

Is there a way to just disconnect the ABS and TCS on the vehicle? and just have regular braking system. I dont care about the ABS or TCS at this point. I just need a car that can take me to work.

BLKFLSH

This is a TCS reset procedure. Don't know if it will help.
http://www.driveaccord.net/forums/sh...78&postcount=5

juniornapeahi

Tried that still having the same problem. I thinking I could have a bad ABS Modulator. Ive pretty much changed everything else with brand new parts.