Timing Balancer Belt..
#1
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: Mansfield, oh, U.S.
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Timing Balancer Belt..
I had a oil leak on my 97 honda accord lx. The leak was coming from the front balance shaft seal. So i had to take the sprocket off and put it back on it which can only go on one way. Then i reinstalled the balance belt and tightened up the balance belt. Now when i car reaches around 3k rpm's i notice a slight vibration coming from the engine..... I am wondering if i missed a tooth on the balance belt? I didnt' have to take off the timing belt b/c it is behind the balance belt so i know its not that........ Any help will be appreciated.......... thanks
#2
Honda-Tech Member
Join Date: Mar 2001
Location: San Luis Obispo, CA
Posts: 1,550
Likes: 0
Received 0 Likes
on
0 Posts
Re: Timing Balancer Belt..
it is possible that you didnt align both both shafts correctly. the front and rear balance shafts needed to be timed aswell. the marks on the pulleys need to be lined up with the marks on the block
Thread
Thread Starter
Forum
Replies
Last Post
Nathan007
Honda Accord (1990 - 2002)
3
11-28-2008 04:26 AM