PTVDesign

Honda Accord 94 CD3-EX JDM (~CD5 USDM) Automatic Transmission

i will be make swap my dead F18B (JDM SOHC no VTEC 125hp) -> F22B (JDM DOHC no VTEC 160hp from Honda Prelude 96 BB5 (obd2) )

i have F22B DOHC from Honda Prelude 96 BB5 (obd2) + ECU (from HONDA Prelude BA8 - obd1) + Wireless...

i need replace engine mounts?
what i need replace?

--
thanks

nus_dogg

I think it should be a straight drop in, if not, you'll need the driverside mount. You might need to convert the engine harness into OBDI unless i'm wrong and can't read.

Merks

You are going to need a prelude drivers side mount, Convert your harness to ODB 1 if it isn't already.

It is pretty much the same thing as swapping in a H22.
I'll be doing this swap myself come the spring time

erk89

You'll need the MAP sensor from the prelude as well as the driver side mount, other than that you should be good!

PTVDesign

all equipment with an engine F22B DOHC

PTVDesign

If the geometry of the same engines, why put a mount from Prelude?

PTVDesign

up