stainless steel clutch lines
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: modesto, ca, u.s.a.
Posts: 657
Likes: 0
Received 0 Likes
on
0 Posts
stainless steel clutch lines
I found this web site http://www.fastlineperformance.com/clutchline.htm
but it dont have any lines for an accord. Is there another site that might have one, and I saw awhile back in a mag a site where you can make your own ss lines can someone piont me in the right direction
but it dont have any lines for an accord. Is there another site that might have one, and I saw awhile back in a mag a site where you can make your own ss lines can someone piont me in the right direction
#2
Honda-Tech Member
Re: stainless steel clutch lines (BlUAc)
I'm pretty sure my 6th gen has hard lines from the clutch master cylinder, all the way to the slave cylinder... I think most other accords should be the same. Those lines would be pretty pointless.
#3
Re: stainless steel clutch lines (AFAccord)
There HAS to be at least a short flexible section to allow for the motion of the engine/tranny assembly. Here's the line for a '98, the rubber section is towards the top-left of the picture.
#4
Honda-Tech Member
Re: stainless steel clutch lines (JimBlake)
I would normally think so, but I've replaced that line before when my mastercylinder went out, and there wasn't any soft lines. Looking on my current Accord, it's solid from the slave all the way around the rear of the block. I didn't get a chance to look around the firewall near the master.
#5
H-T Order of Merit
Re: stainless steel clutch lines (AFAccord)
I know my 95 EX had that short soft line from the passenger side of the engine bay to the slave cylinder.
Not sure where you can get a SS version but people have removed the entire hard line for a SS one, mostly when doing auto-to-manual swaps. Seen it on Civics, Integras and a couple Accords. You can probably get some of the parts from AN Pluming.
Not sure where you can get a SS version but people have removed the entire hard line for a SS one, mostly when doing auto-to-manual swaps. Seen it on Civics, Integras and a couple Accords. You can probably get some of the parts from AN Pluming.
#6
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: stainless steel clutch lines (BlUAc)
Look towards the end of this thread in the Prelude forum and there's tons of pics & info about doing a full SS clutch line. I did mine and it worked you very well.
--https://honda-tech.com/zerothread?id=1210919
--https://honda-tech.com/zerothread?id=1210919
#7
Honda-Tech Member
Join Date: Nov 2005
Location: nine zero nine, CA
Posts: 2,359
Likes: 0
Received 0 Likes
on
0 Posts
Re: stainless steel clutch lines (BlUAc)
I found that same website and wanted one of those for my accord.
I ended up getting one from this site: http://www.tasauto.com for my 5th gen.
i actually noticed a significant difference in clutch engagement, I like it
I ended up getting one from this site: http://www.tasauto.com for my 5th gen.
i actually noticed a significant difference in clutch engagement, I like it
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: modesto, ca, u.s.a.
Posts: 657
Likes: 0
Received 0 Likes
on
0 Posts
Re: stainless steel clutch lines (jdmcd7_cali-luv)
Thanks all for the help
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TouringAccord »</TD></TR><TR><TD CLASS="quote">I know my 95 EX had that short soft line from the passenger side of the engine bay to the slave cylinder.
Not sure where you can get a SS version but people have removed the entire hard line for a SS one, mostly when doing auto-to-manual swaps. Seen it on Civics, Integras and a couple Accords. You can probably get some of the parts from AN Pluming.</TD></TR></TABLE>
Thanks that is what I was looking for and forgot the name
Just a thought if I get a line from the clutch m/c all the way to the slave cyl, how will that make my pedal feel mushey or no?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TouringAccord »</TD></TR><TR><TD CLASS="quote">I know my 95 EX had that short soft line from the passenger side of the engine bay to the slave cylinder.
Not sure where you can get a SS version but people have removed the entire hard line for a SS one, mostly when doing auto-to-manual swaps. Seen it on Civics, Integras and a couple Accords. You can probably get some of the parts from AN Pluming.</TD></TR></TABLE>
Thanks that is what I was looking for and forgot the name
Just a thought if I get a line from the clutch m/c all the way to the slave cyl, how will that make my pedal feel mushey or no?
Thread
Thread Starter
Forum
Replies
Last Post
98savage
Honda Accord (1990 - 2002)
3
03-14-2007 03:26 PM
Heinz57
Honda Civic / Del Sol (1992 - 2000)
7
11-12-2003 02:55 PM