JamesB1985

I'm taking apart an F22A6 and I have the head removed, oil pan, timing belts etc.. I went to remove the flex plate bolts today and removed all but one. This one got rounded off.. Whats your best favorite way to remove stripped bolts?

They are weird shaped bolts. I tried to drill into the middle and use an extractor but they don't seem to be a good material to drill into. I'm thinking I'm going to grind both sides of the bolt down flat to get a 12 or 14mm wrench onto the bolt and try and remove it. Anyone else have any idea's ??

Hairnandez

gator grip

phootbag

lol. no. use a die grinder and reshape it to a hex.

hatchdrvr

http://community.craftsman.com/Craft...er-Set-reviews

Hairnandez

don't knock it til you try it. It's worked 100% of every jacked up bolt i've ever tried.

exb18c1

Rent a welder and weld a nit on it,if not can you put a wise grip on it?

JamesB1985

Nooo! thats the damn tool that f'd up the bolt in the first place! I didnt realize what the bolt was initially so I used that gator grip..it would NOT grip the bolt and rounded off the sides! the damn piece a junk...

I now believe the bolt is an inverted torx pattern. A 12 point 18mm bolt did work on the other bolts.
I tried to drill the bolt but its too hard.

Dc4LsTeG

iTrader: (7)

Can you get vice grips on it?

exb18c1

It is not inverted torx ,it's supposed to be 12 point.

The G-Man

lol @ inverted torx.

MAD_MIKE

It is a 12 point head. Whatever tool brand or set you have you may wish to replace with something more acceptable such as Craftsman, Husky, or Stanley.

As for 'inverted torx', there are 6-point E-Torx which look nothing like 12 point hex or 5-point 'star' fasteners.

A simple rule when it comes to fasteners, if you cannot identify what the fastener is, then you probably should not be working on the component.