Eric Woo

Hello,

I am a newbie. I have a Honda Accord 2000 and it comes with a cassette player. Now a cassette was stuck in it and fail to eject as shown. Therefore, I was thinking about replace this stereo with a new one that can take CD and line-in MP3 player. So I watch some youtube turorials and I opened the deck shell, and try to get a rough idea of which radio is compatible for the size and stuff. So two questions in here:

1. As you can see, I unscrewed the three screws (one behind the clock and two on the bottom of the shell), but still I cannot pull this shell out because I felt like there is another screw or something stuck behind the clock spot.
2. When I pick my choice of cd/mp3 player for my 2000 accord, is there any compatibility issue I should be watching out? Is there any other wires/connectors I should buy to connect the new players to my accord?

Thank you,

Eric

https://www.dropbox.com/s/gwcryb5k3z...%2023%20PM.jpg

https://www.dropbox.com/s/ml1r97gbbs...%2009%20PM.jpg

CD5B2

This guide should help http://www.installdr.com/InstallDocs...PDF/466053.asp

Make sure you buy a dash kit too.

Eric Woo

Thank you. That documentation is exactly what I need. Just ordered a new kenwood receiver and the other tools/kit. As you can see in my photo, after unscrewed all the three screws from the panel, I still cannot remove the panel. It feels like the clip on the top of this panel is soooo tight that I cann't pry it out!! Maybe I should try harder or do you have any advice?

h0p3l355dork

get a set of each of those. and you'll be good to go. ther eare two screws on the bottom, don't forget about them. they're just clips otherwise.