jdadams12

How can I do this?

Is there any chance that I could put an amplifier or two under there?

Bruce Banner

no, u won't b able to put an amp under that.

JDM_DC4_Fanatic

to remove the seat, you have to remove the back first. There are 2 side cushions, one on the left, the other on the right. Push down on the bottom seat cushion just under these side pieces, and you'll see 1 10mm bolt, remove 1 bolt on either side and slide the side panels up and out. there are 4 screws holding the rest of the back to the car. 2 on each side of the seat, again 10mm bolts.

to remove the bottom cushion, there are 2 10mm bolts at the back of the cushion. remove these bolts, filp the seat cushion up and forward, and pop it out.

Something to keep in mind, when you take the seat out, there is a ground for the fuel pump with a 10mm bolt on it. Make sure that you do not disconnect that ground and forget to put it back on, the car will not start.

First remove the bolt under here:


Push down on the seat coushin, and you should see this:


Then, once they are removed on both sides, the seat back would be secured here on both sides:


This is the 1 bolt for the seat bottom:


And this is where the fuel pump is grounded, NO NOT REMOVE!!!

92ACCORD_CB7

You can always have it under the shot gun and driver seat. Thats what I seen some people do, aight laters.

Bruce Banner

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92ACCORD_CB7 &raquo;</TD></TR><TR><TD CLASS="quote">You can always have it under the shot gun and driver seat. Thats what I seen some people do, aight laters.</TD></TR></TABLE>
It would have to be a small amp