Honda_Accord

I got my car inspected and the guys say they cant find my damn OBD Port..

where exactly is this located at? (pics would be nice also)

thanks

*EDIT* in a hurry i didnt search but with a little i did find out where its located (behind astray)

Is this plug GREY? with 5 wires coming out of it? is that the OBD2 Port


Modified by Honda_Accord at 11:57 AM 10/24/2007

JDM_Acccord

i believe it's behind your ashtray.. near your 12v outlet

Honda_Accord

in a hurry i didnt search but with a little i did find out where its located (behind astray)

Is this plug GREY? with 5 wires coming out of it? is that the OBD2 Port

GhostAccord

It's not hard to find. pull out our ashtray and there it is. You don't need to remove anything else to get to it and there is no other connector there. You shouldn't see any wires hanging out of it.

They are usually black and look like the image below.

Honda_Accord

ya thanks man that sit, i guess whoever had the car before me, took it off ... or something

GhostAccord

Honda_Accord

Ok i went to go get it inspected and i failed i belive is the Monitor Part of it, it says the

02 Sens - Not Ready
EGR Sys - Not Ready
Catalys - Not Ready

However
Misfire
FulSys
Comp Cmpnt
02 Sense HTR
DLC

all passed and where ready

my question is what would cause those 3 not to be ready? I haven't done nothing to the engine except for Intake and Ebay Headers. I haven't disconnected my battery, anytime recently. However i didn't drive it when i lived in Virginia for a years time ( I did however start it up periodically). I cleaned the EGR ports once a few months ago.

Any ideas what would cause this would be appricated. Thanks

Car runs perfect, starts up prefect has good gas mileage for 156K miles

It does say something about if you dont drive your car enough after disconnecting the battery it can have the "not ready" settings and having the battery dissconnected .. which honestly in va i did disconnect it a few times and never really drove it afterwards, but i would think driving 1500 miles straight would set everything to be READy.

My check engine light does work (it lights up when i turn the car on and then goes back off after a few seconds) the only bulb NOT in there is the SRS light bulb, bu t i dont know if that really makes a difference

GhostAccord

You should ask the previous owner if he removed or moved anything else while he was installing his stereo.