fdiaz1990

i need the measurements to install my side markers. i also want to to know were to put my side markers on my fenders.

TheMuffinMan

iTrader: (1)

You JUST posted this the other day and it was answered in that thread.

fdiaz1990

but the things is that i have some different side markers. i didnt get the exact measurements.

TheMuffinMan

iTrader: (1)

Don't you think then you should post the type of sidemarkers you have? Rather than ask the same identical vague question? Tandumrunner has the OEM Stanley sidemarkers, I'm assuming then you have eBay specials or ones off another vehicle?

You can just slap them wherever if that's the case, use the OEM as a guideline.

Blue94Accord

haha

fdiaz1990

this all in a bad mood in ****. i was only asking cuz i didnt get the right answer i was looking for. ****in mr. know a lot. trying to get all smart and ****.

TheMuffinMan

iTrader: (1)

Read your post, read the one people posted the exact answer to (measurements, what tools, etc) you posted just like two days ago.

They're identical posts. You give no information other than "i has sidemarkers" They could be from a Mack truck from all we know. The DIY Tandumrunner did was for the OEM sidemarker with OEM placement - there's at least 3 points where the dimensions are shown. If you can't pull the information you need from that then I don't know what to say.

If you have OEM sidemarkers, which it's apparent you don't, then Tandum has the correct placement. If you don't, then you just place them wherever your heart desires, middle of the door, on the hood, etc.

I'll even be nice enough to repost the image from that thread

tamadrummer1120

You has sidemarkers???

I has write-up??

https://honda-tech.com/forums/showth...gen+sidemarker

Anyhow, MuffinMan is right. Show us what you got. If you want them in the "JDM" and "EDM" locations, then follow what I have, just make the proper adjustments as to the difference in size.