dwjgoblue

We are trying to remove the front rotors on our 1996 Honda Accord - 4 cyl sedan.
We have the calipers off and have removed the hub nut but the rotor still won't move.

Do we also have to remove the CV Shaft? Are we missing something?

Dave J.

yardy8301

there are four bolts at the back or the rotor/hub assemble you also need to remove. to remove them i popped the lower ball joint and removed the axle to have some space. then just tap the rotor/hub assembly till it comes off.

Chiovnidca

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yardy8301 &raquo;</TD></TR><TR><TD CLASS="quote"> then just tap the rotor/hub assembly till it comes off.</TD></TR></TABLE>
LMAO Your cars never seen a grain of road salt has it. Up here they take a little more than a tap.

Honda_Accord

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Chiovnidca &raquo;</TD></TR><TR><TD CLASS="quote">
LMAO Your cars never seen a grain of road salt has it. Up here they take a little more than a tap. </TD></TR></TABLE>

Lol ya same here in texas, jesus christ, i had to pound the hell out of it (i was replacing them anyways) and it sitll only got half way, i had to finally give in adn go to autozone and rent this tool for it.. looks some kind of claw.

So go to autozone tell them your problem adn they will definatly give u a tool after u take teh nuts off the back

yardy8301

whenever someone says tap something on your car, it usually means beat the **** out of it.

Honda_Accord

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yardy8301 &raquo;</TD></TR><TR><TD CLASS="quote">whenever someone says tap something on your car, it usually means beat the **** out of it.</TD></TR></TABLE>

ill note that

dwjgoblue

Thanks for the great info. Seems like a challenge removing the ball joint but with a little luck, we can do it.

Dave J.