romani

HI I WANT TO KNOW FRONT 450 WITH 350 IN REAR? SOMEBODY HAVE LINK STEP BY STEP TO INSTALL?
ACCORD 92

adio

at checker or auto zone they have engrish versions of chilton's manuals, you might want to pick one up

TxTuner

Lift the car
Pull the wheels
Unbolt the struts (front and rear) from the towers
Unbolt them from the control arm
Pull them out
Remove top of strut
Remove spring
Throw on Coilover's
Reverse....

It's not a complicated task

jakeiscool

You just cant remove the spring like that. You need a compressor obv.

TxTuner

SSSHHHHHHH!!!!! Let him figure that out himself

jakeiscool

Bad comment TXTuner, that is very unsafe to "figure out" itd be a bad suprise.

TxTuner

ProjectDarkBlack

i didnt use a spring compressor, i layed the assembly down between two tires and put a towel over the set up while i unbolted it, unless the accords have preloaded springs

philadd

They're preloaded. Use a spring compressor. You can borrow the spring compressors from Autozone for a fully-refundable deposit or about $50.

mrxhe1neken

when i installed springs for my car i used spring compressors. but then for my friends car we thought it was so time consuming that we just put it between the tires. o and wen i first installed my springs i didnt know that you needed one of those octogonal tools to place into the top of the strut to remove the nut. so if youre having problems removing the nut at the top, its because u need to use that tool.

TxTuner

That "octogonal tool" is called an Allen key

BigBadBiologist

and that "octogonal tool" is really hexagonal

mrxhe1neken

lol i knew it was called an allen key, but wasnt sure if romani knew what it was called.

95accordh22a

no need for spring compressor, i have done many coilover installs the whole fun of the day is when you get to use an impact gun to take of the top nut and hold the sttrut with your foot and tell your friends to watch out when the spring goes flyin