Fork and Control Arm bolt
#1
Fork and Control Arm bolt
Hi -
How do you remove the bolt that holds lower control arm to fork? It seems to rusted froze inside the control arm bushing. I tried to knock it out with a hammer but with no luck. Also, do you need to remove the fork/control arm connection to remove drive shaft?
Thanks.
Jim
How do you remove the bolt that holds lower control arm to fork? It seems to rusted froze inside the control arm bushing. I tried to knock it out with a hammer but with no luck. Also, do you need to remove the fork/control arm connection to remove drive shaft?
Thanks.
Jim
#2
Honda-Tech Member
Re: Fork and Control Arm bolt (James)
yes the fork has to be removed to take out the drive shaft. spray it good with some lube and hit it a few times with a hammer then let it soak in. if you have a pretty strong impact gun (500 ft/lbs) hit it good going back and forth (fwd/rev) until it comes out easily. if you dont have an impact gun, use a long breaker bar/pipe. chances are that if you dont have the impact sockets (black) you'll break the chrome sockets or shear the bolt itself. good luck.
#3
Re: Fork and Control Arm bolt (boonacka)
got the same problem here. Broke off the bolt head, other end broke off too after soaking for 2 days in PBlaster, sledge hammer w/punch does nothing: stuck little sucker. Looks like I will have to cut through the lower ctl arm bushing and cut it out that way.
Thread
Thread Starter
Forum
Replies
Last Post
myownreality
Honda Civic / Del Sol (1992 - 2000)
5
02-09-2013 10:43 PM
allums34
Honda Civic / Del Sol (1992 - 2000)
6
04-13-2011 09:55 AM
corkss
Honda Civic / Del Sol (1992 - 2000)
10
03-19-2009 07:00 PM