mavvrik

Hey guys. Can't get the car to start. Not sure if it's firing order or something else. So I need some second opinions, does this look correct? It's a 1997 Accord SE. Some help...or just answers would really be appreciated. Seems like NO ONE can help me on this for some reason :/



This is apperently what it should look like?

WhiteyMcBlakc

last time this happened to me, it was several things....bad news is i cant remember what the problems were....so i hope someone on here can help you out.

hondadude

Did this problem hapen right after the plug wire change?
Are you getting spark out to the plugs?
Can you hear the fuel pump run a few seconds when you turn the key on?

mavvrik

Actually guys, after a long grueling week of working on this car non-stop, I finally got it running last night. She's running super strong too

nicokpe

sorry can't help.. so what you had done it can be running again??

Turbowa

If you still really want to know the firing order on every honda 4cyl is 1-3-4-2.

peter t

I know you already figured this out but for future people I thought I would tell you what I found. I don't know as much as you guys by far, but I just replaced my O-ring seal on my distributor and as a dummy would labeled the wires off the cap but didn't mark were they came off, duh!. So I had to find the correct order. Your cap should have an "A" marked on it to tell you were your #1 should go. So on my car F22B2 engine my #1 went were your #2 is then #2, #4, #3 counter clock wise in that order. Hope that helps

tonio405

How man thank you so much I thought I had replace my fuel pump but it was just the wire order thank u