EVAP solenoid valve/flow switch help - Honda-Tech
Go Back   Honda-Tech > Honda and Acura Model-Specific Technical Forums > Honda Accord (1990 - 2002)
Log In 
Search



EVAP solenoid valve/flow switch help

Reply
 
 
 
 
LinkBack Thread Tools Search this Thread
Old 05-23-2011, 04:38 PM   #1
Honda-Tech Member
 
Join Date: May 2011
Location: Denver, CO
Posts: 130
iTrader Rating: (0)
Default EVAP solenoid valve/flow switch help

New to forum but have probably read 1000 posts so far in the week since I've bought this '96 EX wagon, auto.

Two EVAP pieces were broken when I bought it. The bottom nipple on the "VALVE ASSY., PURGE CONTROL SOLENOID", and the tee that connects the vacuum line from the solenoid to both the canister and the "SWITCH ASSY., PURGE FLOW (A37)". I replaced the tee and epoxied the solenoid nipple back on. The nipple is on there solid with no leaks or obstructions. I'm gratefull for the diagram provided by Dannyvho here:
http://www.htarchive.net/showthread.php?p=40429686
The second PDF (B111), ACCORD 4D 1996 KA LX 4AT, B-1-11 PURGE CONTROL SOLENOID VALVE ('96,'97), is exactly how my evap is plumbed under the hood.

Took it to get emissions and it failed HC by almost double the max (2.25 measured vs. 1.20 max) and CO even worse: 76.4 measured vs. 15.0 max. The emissions test place gave me graphs of the purge rate, CO, and HC, and it looks like the EVAP system is out of control. The car runs fine. Compression is 160psi x 4 @ 5280' altitude...corrected to sea level I think thats around 185psi. New plugs, no misfire, runs very strong. The only thing I've done to the engine is clean out the EGR ports, change the oil, and change the air filter, plus the new plugs. No vacuum leaks at idle. It passed Oregon emissions two months ago (I don't have the readings, just the pass sheet) and Colorado emissions a year ago, but I noticed that the NOx was kinda' high so I cleaned the EGR ports. They were filled solid.

So, thinking either the PO or I screwed up the EVAP system, I thought I'd troubleshoot it using my FSM, but it's for a '94 Accord and it doesn't show the troubleshooting flowchart for how my '96/auto is plumbed. Does anyone have these (I think) two pages that they'd be willing to post? It's an F22B2.
__________________
'96 LX wagon F22B2 auto
Roader is offline   Reply With Quote
 
 
 
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Troubleshooting P1457 Code Todhunter Honda Accord (1990 - 2002) 10 01-05-2014 12:02 PM
?EVAP Purge Control Solenoid Valve? slamLOWnBANGIN Honda Civic / Del Sol (1992 - 2000) 4 10-16-2010 11:00 AM
EVAP purge control solenoid valve JDM_Andrew Honda Civic / Del Sol (1992 - 2000) 4 07-27-2009 09:17 PM
Engine Check Code Need help understanding it HELP PLEASE! FRKWOO Honda Accord (1990 - 2002) 2 11-08-2008 09:19 PM
Emission Test Results... briefly explain emission control systems and test results gmoneyef Tech / Misc 3 02-06-2007 12:48 PM


Tags
1998, 96, accord, celanoid, diagram, evap, honda, lx, order, showing, solenoid, switch, swith, vacuum, valve

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



 
All times are GMT -8. The time now is 08:22 AM.


2014 Copyright, InternetBrands Inc.
Powered by vBulletin® Version 3.8.7 AC2
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.