TwoKSiR

I'm trying to find the bushing in the rear lower contorl arm that the lower strut bolt goes through. I'm putting Tokico Illumina's and Ground Control's in my girls Accord. The rear lower strut bolts are seized in there (go figure) so i have to cut the struts out and im gonna have the bushings pressed out and new pressed in. I want to put Energy Suspension bushings in but they dont list it for the Accord but they do list it for the Prelude. Can I use them off the lude? How different are the lower control arms? Has anyone done this before? Thanks for your help. Here's some before and after pics of the de-ricing.





Here's an old post with mod's. Only changes are the suspension. threw away the DC header for a stock JDM h22 header and AEM cold air off a 95 Prelude VTEC and wheels.
https://honda-tech.com/zerothread?id=2111487

TheMuffinMan

iTrader: (1)

Those rear lower strut bolts always are a pain, do you have air tools ?

Those + PB Blaster over night =

TwoKSiR

Tried that. I have a 600 ftlb impact that wouldnt take them out after a coupel nights of soaking in PB blaster. There in there good, even though the suspension was out 2 years ago.