ECU Testing
09-20-2013, 04:27 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2013
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
ECU Testing
Is there an easy way to test the ecu unit in my 1990 Honda Accord. I'm not getting any fire from my coil. I've tested and change both the ignitor and coil but still get no fire to the coil. I need help. The car was running but missing and all this started once I pulled the distributor to check all the wires, ICM and coil. Once I re installed the distributor, I have no fire and have check everything I can think of.
Thanks
Brian
Thanks
Brian
09-21-2013, 04:42 AM
#3
Re: ECU Testing
use this site to test your ignition system
http://techauto.awardspace.com/
you should first check for power at the distributor it should have power when the ignition is switched on...the ecu toggles the ground side
http://techauto.awardspace.com/
you should first check for power at the distributor it should have power when the ignition is switched on...the ecu toggles the ground side
Thread
Thread Starter
Forum
Replies
Last Post
rollinswapshop
Honda CRX / EF Civic (1988 - 1991)
4
03-16-2011 07:43 PM
rollinswapshop
Honda CRX / EF Civic (1988 - 1991)
1
03-15-2011 03:11 PM
kickz
Honda CRX / EF Civic (1988 - 1991)
3
01-04-2007 06:43 AM
civicjdmb16a
Tech / Misc
1
10-13-2006 06:26 PM