steve96accord

i have a f22b2 i was j/w if a 1g or 2g or the evo 3 would fit my car r any other manifold that will not cost a arm an a leg for. also looking for any advice on cheaper setups for turbo on the accord. thanks an BYE BYE

1993civicex

mitsubishi eclipse turbo will fit from the late 90's.........slight adjusting needed

brads94accord

no it will not fit...
SEARCH BEFORE YOU POST.

this has been covered sooooo many times.
this question gets asked atleast twice a day

momstaxi

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by steve96accord &raquo;</TD></TR><TR><TD CLASS="quote">any other manifold that will not cost a arm an a leg for. </TD></TR></TABLE>

ss autocrome baby

LOGICx420x

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by brads94accord &raquo;</TD></TR><TR><TD CLASS="quote">this has been covered sooooo many times.
this question gets asked at least twice a day</TD></TR></TABLE>

Yes it has......

1993civicex

get an f22a1 head it flows better and bolts right up to the block and the manifold

Nick H

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1993civicex &raquo;</TD></TR><TR><TD CLASS="quote">get an f22a1 head it flows better and bolts right up to the block and the manifold </TD></TR></TABLE>

it doesn't bolt right up, but the ports line up with the f22a1 head...you simple drill new holes and maybe do a little porting on the manifold...whala, cheap fix...slap a td0x on with some custom piping and you have a cheap turbo setup....uberdata and dsm 440 cc injectors for fuel managent and you are set...

ATX96coupe

and doesnt the f22a6 head flow better anyway? ive just been told that it has the best port geometry...oh well