Does CB7 (90-93) accord PCV system the same as B18?
#1
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: Vancouver BC and Blaine WA, Ca/USA
Posts: 812
Likes: 0
Received 3 Likes
on
2 Posts
Does CB7 (90-93) accord PCV system the same as B18?
Im researching installing a catch can, and removing the PCV system, and i came across a good post, but its for b18c, not sure if F22A engines have this "PCV Chamber" or the "Crankcase ventilation hole" can someone let me know if we do? ill find out soon enough when i pull the motor, but just wondering, and also to remove the PCV system on our cars, all we have to do is then disconnect 3 lines? Thanks!!
#3
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: Does CB7 (90-93) accord PCV system the same as B18? (aleks77)
Have you tried looking for the black box? None of the F/H series engines have the black box. We just have crankcase breather hose and the crankcase-to-intake manifold PCV hose.
Don't 'remove' the PCV system.
Don't 'remove' the PCV system.
#4
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: Vancouver BC and Blaine WA, Ca/USA
Posts: 812
Likes: 0
Received 3 Likes
on
2 Posts
Thanks for the reply!! Im gonna "remove" the stock pcv system, and run 2 -10an lines from the front of the valve cover to a catch can with a breather, and also run a line from the VC breather.
#5
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: (aleks77)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aleks77 »</TD></TR><TR><TD CLASS="quote">Thanks for the reply!! Im gonna "remove" the stock pcv system, and run 2 -10an lines from the front of the valve cover to a catch can with a breather, and also run a line from the VC breather.</TD></TR></TABLE>
Are you going to be revving much higher than stock or boosting? That's usually the reason people do those VC vent tubes..
If you remove the stock system you won't have any vacuum pulling out the pressure anymore.
Are you going to be revving much higher than stock or boosting? That's usually the reason people do those VC vent tubes..
If you remove the stock system you won't have any vacuum pulling out the pressure anymore.
#7
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: (aleks77)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aleks77 »</TD></TR><TR><TD CLASS="quote">gonna be boosting over 20psi. </TD></TR></TABLE>
Well, there ya go.
Well, there ya go.
Thread
Thread Starter
Forum
Replies
Last Post