Clicking noise while turning
#1
Junior Member
Thread Starter
Join Date: Sep 2007
Location: East Bay, Ca
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Clicking noise while turning
tried searching. Have a 97 accord. Every time I make a left or right turn I can hear a clicking noise coming from my axles. Do I need to replace?
#3
Junior Member
Join Date: Nov 2003
Location: hickville, Virginia, USA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clicking noise while turning
No you don't have to replace the axles. You will mostly likely have to replace the CV boots and possible the joints.
Jack the car up and check behind the tire, you will see a rubber boot where the hub connects to the axle. If you see grease all around there, then the CV boot is torn.
Jack the car up and check behind the tire, you will see a rubber boot where the hub connects to the axle. If you see grease all around there, then the CV boot is torn.
#4
Honda-Tech Member
Join Date: Apr 2004
Location: Buckeye Country, United States
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clicking noise while turning
No you don't have to replace the axles. You will mostly likely have to replace the CV boots and possible the joints.
Jack the car up and check behind the tire, you will see a rubber boot where the hub connects to the axle. If you see grease all around there, then the CV boot is torn.
Jack the car up and check behind the tire, you will see a rubber boot where the hub connects to the axle. If you see grease all around there, then the CV boot is torn.
Yeah, what he said
#5
Junior Member
Join Date: Dec 2007
Location: Crofton, BC, Canada
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clicking noise while turning
I have the same issue with clicking when turning, and I know its my CV. However, I have checked that thing extreamly thoroughly and none of the boots are torn and there is no grease leaking out.
Trending Topics
#8
Honda-Tech Member
Re: Clicking noise while turning
ok technically u dont have to change out the axles, but IMHO it is just easier to do instead of having to buy a kit and do it all yourself (unless of course u get someone to do it for you) thats just my 2cents, u do what you want. Sense in my opinion changing out an axle is a simple fast job. Im not sure how much your into cars though so your call
#9
Honda-Tech Member
Re: Clicking noise while turning
mine use to click everytime i turn when i was 2" or lowered. then when i switched over to Tein S Tech, it never did it again. I guess there's too much pressure on the CV joints when lowered, so it'll click when you turn even though the boots arent torn.
Thread
Thread Starter
Forum
Replies
Last Post
lowRIDAH
Honda Civic / Del Sol (1992 - 2000)
12
12-27-2004 09:05 AM