HoNdAeX11

I have a Check Engine Light that just came on yesterday after i picked my car up at a shop, they had just put a new oil pan and oil gasket on and to do this they had to drop the exhaust system down so what could have happend? Im going to jump the ECM and read the code, but i wanted to know what you guys think? thanks

SOHCArchangel

i have no clue, just pull the code.....

4doorH22

What year is your car? The code will probably be the O2 sensor.
The probably forgot to plug it back in

SOHCArchangel

lol, oh yeah (long day )

HoNdAeX11

94 Accord Ex, ill check the O2 sensor

HoNdAeX11

the o2 sensor is it down right before the catalytic converter?? thanks

HoNdAeX11

Nevermind i found it, it seems to be alright, any other suggestions before i pull the code? And can i use any wire to jump the ECM?

scrubachu

yup, any wire will, do. paperclip works also, ansything metal.

HoNdAeX11

alright i did it, Code 22, Something to do with the VTEC , this sucks, thanks for the help guys

4doorH22

22 - VTEC System Malfunction

Uh oh. Is your VTEC "kicking in?" Reset the ECU... pull the ECU fuse and let it sit for like 10 minutes, then put it back. See if the light comes back.

Edit: Probably won't change a damn thing, but, hey, always do the "reset the ECU trick" first before you start checking wires and lines.


[Modified by 4doorH22, 6:54 PM 5/16/2002]

Mrfirefox

Same thing happened to me and my oil pressure was too low for VTEC to kick in... actually I had almost no oil

4doorH22

Yeah, but low oil doesn't throw a CEL.

HoNdAeX11

yeah, my Vtec is not kicking in i noticed today on the way home. Ill give the ECU a reset tomorrow afternoon, ill let yall know what happens, thanks