accord front hub removal for replacing rotors
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2007
Location: san diego, ca
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
accord front hub removal for replacing rotors
im trying to remove the front hub from the knuckle because im replacing the rotors. i already remove the 4 bolts behind the knuckle and according to the chilton book, once u remove those 4 rear bolts. the hub should come out. but it doesnt. is their any special tools that i need to get in order to remove the rotors???
oh yeah! i already remove the entire knuckle from the car.
oh yeah! i already remove the entire knuckle from the car.
#2
Re: accord front hub removal for replacing rotors
For 90-97 accord check FAQ https://honda-tech.com/forums/honda-accord-1990-2002-2/1997-accord-brakes-tutorial-1281812/
#3
Honda-Tech Member
Re: accord front hub removal for replacing rotors
Sometime they can be rusted to the knuckle itself. (Which happened to me) My suggestion is place a block of wood, or same diameter as the wheel bearing and hit it from behind with a hammer.
I brought it to a shop and what they did was, they use those huge sockets and start beating it with a hammer. It popped out just fine.
I brought it to a shop and what they did was, they use those huge sockets and start beating it with a hammer. It popped out just fine.
Thread
Thread Starter
Forum
Replies
Last Post
SlowPokeEg
Honda Accord (1990 - 2002)
22
01-12-2014 10:31 PM
jpopvriens
Honda Accord (1990 - 2002)
9
04-25-2007 05:49 PM
accord_si
Honda Accord (1990 - 2002)
13
07-31-2006 06:20 AM
dwjgoblue
Honda Accord (1990 - 2002)
6
09-22-2005 04:14 AM
integra7
Honda Accord (1990 - 2002)
17
12-04-2001 12:41 PM