1988dxsedan

iTrader: (2)

Ok guys. Im trying to find some answers for a friend. He has the jdm f20b swap in his 98 accord. Its currently jumped to obd1. The problem is it needs to pass obd2 plug in emissions. How is everyone getting around this using obd1 ecu's? I have read guys running obd2 h22 ecu but the check engine light will come on with that ecu therefore not passing obd2 emissions tests. Any help would be awesome ! Thanks guys

Matt

h23isnotabigblock

i have the PCB obd2 f20b ecu if he is interested.

send me a pm.

crx_91si

but you'll still have no DLC conection. JDM/EDM ECU's dont use it. You'll need a OBD2 USDM ecu for your DLC to work.

1988dxsedan

iTrader: (2)

i thought there was a reason why he didnt use a jdm one. other than they are hard to find. what ecu is used? like i said i think ppl use the h22 ecu but he said he thought it would still throw a cel there for failing emissions. i find it hard to believe everyone running this setup is jsut flat out running with no type of state inspection. here in PA you cannot get emissions w/o insp or vise versa.and its virtually impossible to lick and stick a plug in obd2 emissions test. hmmm anyone got any advice? i said put the oe engine back in and be done.

-can the h22 ecu be used? and if so is there a way to eliminate the cel or sensor that is different than the f20b causing the cel? whether it be a company that chips it or whatever.

thanks for the feedback so far...

93f20bdelsol

im using a p28 with the h22 basemap on my f20b

YeuEmMaiMai

are you in cali cause if you are, it isn't gonna pass unless you "pay"...........

bkzilla69

I live in new York and need to pass emissions testing had anyone figured this out yet?