96 honda accord lx f22b2 no spark
#1
96 honda accord lx f22b2 no spark
Okay i'm in the need of some help. I have a 96 honda accord lx with a f22b2. The engine blow up so i bought a 95 honda accord lx f22b2 engine. After i was done swapping the engine into my accord i was getting no spark and seen that i had a plug on my harness that wasn't getting used. So i been looking it up, and i have found that my 96 was the first year of obd2 and it had a crank sensor and a top dead center sensor down in the timing cover. So i know this is why i'm not getting spark because the 95 f22b2 engien i swapped in did not have one on the crank but it was in the distributor. So i put a 95 distributor back on and wired it to work and ran the wires from the crank sensor plug/ top dead center plug over to the 95 distributor because i know in 95 the crank sensor and top dead sensor was in the distributor. I did this all with a wiring diagram. So anyways im for sure now that i have ran the wires correctly but im still not getting any spark. So if anyone could point me to someone that has done this swap before or knows what my next move should be that would be great.
Thanks
Thanks
#2
Re: 96 honda accord lx f22b2 no spark
Hate to say this but I'm going to give it to you straight.
It would be best to put the wiring back exactly how they were and take the oil pump AND crank timing pulley off of the '96 engine and put it onto the '95 engine and call it a day.
The '95 will now officially be your '96. Obviously use the intake manifold from your '96.
It would be best to put the wiring back exactly how they were and take the oil pump AND crank timing pulley off of the '96 engine and put it onto the '95 engine and call it a day.
The '95 will now officially be your '96. Obviously use the intake manifold from your '96.
#3
Re: 96 honda accord lx f22b2 no spark
Okay so thanks for getting back with me. Now just to make sure that i am getting this right i should just go a head and pull that crank sensor off the 96 engine and put it on the 95 engine and what is the difference in the intake manifolds?
#4
Re: 96 honda accord lx f22b2 no spark
After you install the crank seal just be sure to wipe off any excess grease that's on the outside. You don't want any grease slinging around the belts.
Thread
Thread Starter
Forum
Replies
Last Post
redline870
Honda Accord (1990 - 2002)
46
04-01-2013 01:52 PM