94 Accord Cigarette Lighter Outlet LOOSE
08-10-2002, 11:01 AM
#1
Thread Starter
Join Date: Jul 2002
Location: New York, NY, USA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
94 Accord Cigarette Lighter Outlet LOOSE
Hi,
A few months ago, I had my radar dectector plugged into my cigarette lighter and unplugged it. Due to the tight fit, the plug for the detector yanked out the cigarette lighter outlet. Since then, its operating half the time. The LED for the ashtray works because I see the blue light. The LED for the cigarette lighter works too, so i think the only problem here is that the assembly housing is loose. I was thinking about drilling 2 holes and screwing the black face in, but that would do nothing for the actual outlet. Any ideas?
The outlet works fine, its just a loose connection I need to fix. Perhaps some conductive glue?
Thanks all.
A few months ago, I had my radar dectector plugged into my cigarette lighter and unplugged it. Due to the tight fit, the plug for the detector yanked out the cigarette lighter outlet. Since then, its operating half the time. The LED for the ashtray works because I see the blue light. The LED for the cigarette lighter works too, so i think the only problem here is that the assembly housing is loose. I was thinking about drilling 2 holes and screwing the black face in, but that would do nothing for the actual outlet. Any ideas?
The outlet works fine, its just a loose connection I need to fix. Perhaps some conductive glue?
Thanks all.
Thread
Thread Starter
Forum
Replies
Last Post
