'94-'97 Accord front knuckles same as '90-'93?
#1
'94-'97 Accord front knuckles same as '90-'93?
Does anyone know if the knuckles from each generation are interchangeable? I am looking to do a ROH conversion on my '92 Accord but I would rather pick up another pair of front knucles to work on so I can work on them without having to let my Accord sit in the garage apart. If both are interchangeable, it will make finding another pair easier.
Thanks
Thanks
#3
Re: '94-'97 Accord front knuckles same as '90-'93?
Bought mine here...
http://www.tasauto.com/Product/Brows...nq=0&p=1&sz=50
I bought the hub and bearing without the pads( the part at the bottom of the page)but if you buy with the pads(Akebono or Nissin) it shows the years 90-97 so it would appear they are but that could just be that the hub/bearing will fit in both.
Actually it does show separate part numbers here.. so how different they are I'm not sure.
http://www.hondaautomotiveparts.com/...tcgry5=KNUCKLE
http://www.hondaautomotiveparts.com/...tcgry5=KNUCKLE
http://www.tasauto.com/Product/Brows...nq=0&p=1&sz=50
I bought the hub and bearing without the pads( the part at the bottom of the page)but if you buy with the pads(Akebono or Nissin) it shows the years 90-97 so it would appear they are but that could just be that the hub/bearing will fit in both.
Actually it does show separate part numbers here.. so how different they are I'm not sure.
http://www.hondaautomotiveparts.com/...tcgry5=KNUCKLE
http://www.hondaautomotiveparts.com/...tcgry5=KNUCKLE
Thread
Thread Starter
Forum
Replies
Last Post
732xghost
Honda Accord (1990 - 2002)
4
05-30-2009 05:33 PM