Notices
Honda Accord (1990 - 2002) Includes 1997 - 1999 Acura CL

2002 Accord: Belt squealing when starting after replacement

Thread Tools
 
Search this Thread
 
Old 07-05-2014, 06:40 PM
  #1  
Honda-Tech Member
Thread Starter
 
Jason777's Avatar
 
Join Date: Jul 2014
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Icon2 2002 Accord: Belt squealing when starting after replacement

I had a mechanic replace some belts on a 2002 Accord EX 4-cylinder. The mechanic told me the following belts are replaced:
  • Timing belt
  • Balancer shaft belt
  • Serpentine Belt
  • Power steering belt
  • Water pump

After a few days I noticed when starting, sometimes I could hear squealing for a few seconds. After that initial squealing everything would be OK.

I took it to the mechanic and he did some belt adjustments. The squealing problem seemed to be fixed.

But now after a month, the problem came back. However, the squealing duration has significantly decreased, to less than half a second compared to around 3 seconds before the adjustments.

It doesn't always squeal when starting. It is more likely to happen when starting in cold weather.

I'm not very good with cars so I'd be very grateful if you guys could give me some advice. What's the cause of the squealing? Did my mechanic use the right belts? Did he install the belts correctly? Is it necessary to do more adjustments?

Thanks!
Old 07-05-2014, 07:35 PM
  #2  
Honda-Tech Member
 
tim73's Avatar
 
Join Date: Apr 2011
Location: Savannah, GA
Posts: 666
Likes: 0
Received 1 Like on 1 Post
Default Re: 2002 Accord: Belt squealing when starting after replacement

Is the AC on when it squeels? Maybe the Ac or the alternator betl, probably not a big deal, he might have used a cheap belt.
Old 07-05-2014, 08:13 PM
  #3  
Honda-Tech Member
Thread Starter
 
Jason777's Avatar
 
Join Date: Jul 2014
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 2002 Accord: Belt squealing when starting after replacement

Originally Posted by tim73
Is the AC on when it squeels? Maybe the Ac or the alternator betl, probably not a big deal, he might have used a cheap belt.
No the AC is not on.
Old 07-05-2014, 08:33 PM
  #4  
MM Gruppe B
 
MAD_MIKE's Avatar
 
Join Date: Feb 2009
Location: 94577/Gaillimh
Posts: 6,892
Likes: 0
Received 83 Likes on 76 Posts
Default Re: 2002 Accord: Belt squealing when starting after replacement

New belts may stretch a bit after install, recheck tension or have the mechanic readjust it.
Old 07-05-2014, 11:36 PM
  #5  
B*a*n*n*e*d
 
holmesnmanny's Avatar
 
Join Date: Dec 2008
Posts: 12,028
Likes: 0
Received 4 Likes on 4 Posts
Default Re: 2002 Accord: Belt squealing when starting after replacement

Originally Posted by MAD_MIKE
New belts may stretch a bit after install, recheck tension or have the mechanic readjust it.
+1


Perhaps if the belt was originally tensioned to spec it may not squeal even after a few days of engine running since new belts stretch a bit a few miles after installation, if the new belt was originally a little loose than it should have been, it's going to squeal after a few miles, no doubt.

On the longest side of any serpentine belt, in the very middle of that side, if you can twist it more than 90 degrees the belt is too loose. So check it.
Old 07-06-2014, 12:51 PM
  #6  
Honda-Tech Member
 
onunezp's Avatar
 
Join Date: May 2014
Posts: 102
Likes: 0
Received 1 Like on 1 Post
Default Re: 2002 Accord: Belt squealing when starting after replacement

Originally Posted by holmesnmanny
+1


Perhaps if the belt was originally tensioned to spec it may not squeal even after a few days of engine running since new belts stretch a bit a few miles after installation, if the new belt was originally a little loose than it should have been, it's going to squeal after a few miles, no doubt.

On the longest side of any serpentine belt, in the very middle of that side, if you can twist it more than 90 degrees the belt is too loose. So check it.
how can i tighten the alternator belt? its making a horrible squeal when i turn the car on, thank you.
Old 07-06-2014, 01:55 PM
  #7  
Honda-Tech Member
 
onunezp's Avatar
 
Join Date: May 2014
Posts: 102
Likes: 0
Received 1 Like on 1 Post
Default Re: 2002 Accord: Belt squealing when starting after replacement

ok, i did it myself by following instructions in this video,
clockwise to tighten


Jason, do it to see if corrects your issue, worked for me!
Old 07-07-2014, 02:06 PM
  #8  
Honda-Tech Member
Thread Starter
 
Jason777's Avatar
 
Join Date: Jul 2014
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 2002 Accord: Belt squealing when starting after replacement

Thanks guys for the advice and video. I'll try and let you know.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
techsupport
Honda Accord & Crosstour (2003 - 2012)
2
03-29-2017 08:43 PM
aznromeo4u
Honda Accord (1990 - 2002)
4
02-18-2015 07:51 PM
famfive
Honda Accord & Crosstour (2003 - 2012)
3
07-25-2010 08:29 AM
1baddcivicsi
Honda Accord (1990 - 2002)
12
05-03-2009 10:23 PM
m.woo
Honda Accord (1990 - 2002)
1
07-29-2007 10:50 PM



Quick Reply: 2002 Accord: Belt squealing when starting after replacement



All times are GMT -8. The time now is 03:47 PM.