accordlover99

Hi everyone!

So I was trying to replace my interior car door light (not sure what it's called exactly) with a replacement LED bulb but I accidentally ended up pushing the original stock bulb into the door. Now there's just a empty hole where the light fixture should be. Any ideas on trying to get it back out?


Also while we're on this topic does anyone know the exact LED bulb type I need to replace the front dome lights? Interior lights? I'm not sure what they're called exactly but it's not the main dome light that's right in the middle of my roof, but towards the front of the car in front of the rear-view mirror.

Thanks in advance!!

coolswimmerjon

I replaced all the interior lights with LEDs including the step lights in each door. I have a 97 Accord EX Wagon 2.2l VTEC. I used these for every light (including the dome light next to the rear view mirror) except the dome light over the rear seats.

http://www.ebay.com/itm/CREE-High-Power-XP-E-LED-31mm-Festoon-bulb-Interior-Dome-Map-Light-DE3175-DE3022-/360640442915?pt=Motors_Car_Truck_Parts_Accessories&hash=item53f7d87223&vxp=mtr
I used these for the dome light over the rear seats.

http://www.ebay.com/itm/10W-HID-White-Error-Free-36mm-CREE-XP-G-LED-Festoon-Bulb-For-Dome-Lights-6418-C2-/161133939461?pt=Motors_Car_Truck_Parts_Accessories&hash=item258454cb05&vxp=mtr
The LED ends were slightly larger diameter than the original bulbs but they still were able to squeeze into the clips.

Whatever you get, Cree LEDs are so much better than the "festoon" LED crap.