OFFICIAL CG SQUAD THREAD
#1
Honda-Tech Member
Thread Starter
Official cg squad thread
ok so i had been meaning to create the sqaud for a long time now, and it's finally here
so if you wanted to join the squad all i'll need is a medium sized pic of your car to add to the roll call below and basically that is it
i'll be constantly updating the first post so you can get your member# from there if you want to add it to your sig
and if you ever want to change pictures or whatever PM me and i'll take care of it
[FONT SIZE="4"]of course there are going to be a few rules and regulations to follow
but basically don't be a douche canoe to other members, typical stuff [/font]
#001
361 accord
#002
Cannon Man
#003
FunnyVictor86
#004
slow f23
#005
xlilsharkyx
#006
Sketch o5
#007
-RedneckDave-
#008
02 accord
2002 Accord SE 5 speed
#009
hotaccord243
#010
indowanksta88
#011
talontsiawd
#012
00Accord4cyl
#013
mista jc
#014
BlkChryKord
#015
Accord2Show
#016
aznpridelivin2o3_cg5
#017(retired)
DSRxRICKY
#018
oodie
#019
AccordSeduction
so if you wanted to join the squad all i'll need is a medium sized pic of your car to add to the roll call below and basically that is it
i'll be constantly updating the first post so you can get your member# from there if you want to add it to your sig
and if you ever want to change pictures or whatever PM me and i'll take care of it
[FONT SIZE="4"]of course there are going to be a few rules and regulations to follow
but basically don't be a douche canoe to other members, typical stuff [/font]
#001
361 accord
#002
Cannon Man
#003
FunnyVictor86
#004
slow f23
#005
xlilsharkyx
#006
Sketch o5
#007
-RedneckDave-
#008
02 accord
2002 Accord SE 5 speed
#009
hotaccord243
#010
indowanksta88
#011
talontsiawd
#012
00Accord4cyl
#013
mista jc
#014
BlkChryKord
#015
Accord2Show
#016
aznpridelivin2o3_cg5
#017(retired)
DSRxRICKY
#018
oodie
#019
AccordSeduction
Last edited by 361 accord; 01-18-2009 at 12:34 AM.
#5
Honda-Tech Member
Thread Starter
Re: (FunnyVictor86)
haha
its a pretty clean accord, i like the bronze with polised lip, and the front lip
but victor's accord is sick, coupe front end conversion ftw,
i am kinda torn between stock sedan and a coupe conversion because me front end is perfect as is and the paint is custom and can't be matched
its a pretty clean accord, i like the bronze with polised lip, and the front lip
but victor's accord is sick, coupe front end conversion ftw,
i am kinda torn between stock sedan and a coupe conversion because me front end is perfect as is and the paint is custom and can't be matched
#6
Junior Member
Join Date: Dec 2007
Location: Staring down the barrell of my 12 ga. Texas, USA
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
Re: (361 accord)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 361 accord »</TD></TR><TR><TD CLASS="quote">
i am kinda torn between stock sedan and a coupe conversion because me front end is perfect as is and the paint is custom and can't be matched </TD></TR></TABLE>
then get new paint.
sorry dude, i had to throw in on this.
i am kinda torn between stock sedan and a coupe conversion because me front end is perfect as is and the paint is custom and can't be matched </TD></TR></TABLE>
then get new paint.
sorry dude, i had to throw in on this.
#7
Junior Member
Join Date: Dec 2007
Location: Staring down the barrell of my 12 ga. Texas, USA
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Honda-Tech Member
*re-edit*
im only posting a list of my mods in case anyone wants to know about my setup
Year/Make/Model:
2001 Honda Accord EX
Engine:
2.3 ULEV SOHC VTEC [F23A4]
Trans:
Stock P2a8 [5 Speed]
Performance:
AEM CAI
Megan Racing Header
8MM Accel Wires
NGK Iridium Ix Plugs
Apex-i Neo [AFC/VAFC]
DriveTrain:
ACT HA3-HDSS Clutch
XACT ProLite Flywheel
Suspension:
Tein S-Tech Springs
Tokico HP Shocks
Exterior:
USDM Black Housing Headlights
Coupe Front Clip Conversion
OEM 15" EX Wheels Wrapped In 195/65/15 [Daily]
18" Zenetti Mystic Wheels Wrapped In 215/35/18 Federal Tires [Winter]
Modified by FunnyVictor86 at 8:55 PM 10/20/2008
im only posting a list of my mods in case anyone wants to know about my setup
Year/Make/Model:
2001 Honda Accord EX
Engine:
2.3 ULEV SOHC VTEC [F23A4]
Trans:
Stock P2a8 [5 Speed]
Performance:
AEM CAI
Megan Racing Header
8MM Accel Wires
NGK Iridium Ix Plugs
Apex-i Neo [AFC/VAFC]
DriveTrain:
ACT HA3-HDSS Clutch
XACT ProLite Flywheel
Suspension:
Tein S-Tech Springs
Tokico HP Shocks
Exterior:
USDM Black Housing Headlights
Coupe Front Clip Conversion
OEM 15" EX Wheels Wrapped In 195/65/15 [Daily]
18" Zenetti Mystic Wheels Wrapped In 215/35/18 Federal Tires [Winter]
Modified by FunnyVictor86 at 8:55 PM 10/20/2008
#10
Honda-Tech Member
Re: (FunnyVictor86)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FunnyVictor86 »</TD></TR><TR><TD CLASS="quote">*re-edit*
here's a preview of mine ... i wanna know what suspension setup Cannon Man is sitting on ... looks nice ... i'm not satisfied with my s.tech's ... i need to tuck more
</TD></TR></TABLE>
Im on GC'S and koni yellow. I got the spring rates too high because it feels like my shocks are going down the drain, but it still handles great for a pig of a car. 450f/400r
here's a preview of mine ... i wanna know what suspension setup Cannon Man is sitting on ... looks nice ... i'm not satisfied with my s.tech's ... i need to tuck more
</TD></TR></TABLE>
Im on GC'S and koni yellow. I got the spring rates too high because it feels like my shocks are going down the drain, but it still handles great for a pig of a car. 450f/400r
#12
Honda-Tech Member
Re: (slow f23)
350 for the gc's I think, and a little over 600 for the koni's installed at home. If I had to do it again Id go with a full coilover set like the f2's or D2. I think the problem was that being so low and on such hard springs the shocks just couldnt cope (Im down ~4in)
#13
Honda-Tech Member
gc as in ground control ? i had skunk2 coilovers [not full coilovers] and one of the aluminum sleeves split on me ... but yea the car is low enough for me i dont want to slam it but the tires dont tuck enough either yet i dont want to have clearance issues either ... life is so hard sometimes lol
#14
Honda-Tech Member
Join Date: Jan 2008
Location: columbus
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
hah dude, thats the best part of coilovers though. you can slam the **** out of them, or find the perfect height.. its up to you, rather than up to the springs you bought.
#15
Honda-Tech Member
yea i know lol ... im going to see if i can get a new sleeve for my skunk2's ... i found this on skunk2's site it sounds right but im not sure
http://www.skunk2.com/mm5/merc...-0900
http://www.skunk2.com/mm5/merc...-0900
#16
Honda-Tech Member
Re: (FunnyVictor86)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FunnyVictor86 »</TD></TR><TR><TD CLASS="quote">gc as in ground control ? i had skunk2 coilovers [not full coilovers] and one of the aluminum sleeves split on me ... but yea the car is low enough for me i dont want to slam it but the tires dont tuck enough either yet i dont want to have clearance issues either ... life is so hard sometimes lol </TD></TR></TABLE>
Right, I have no complaints about the gc's build quality. I take it to the canyons sometimes push it pretty hard and they've held up. For you Id say stay with the standard rate and some adjustable shocks and you'd be happy.
Right, I have no complaints about the gc's build quality. I take it to the canyons sometimes push it pretty hard and they've held up. For you Id say stay with the standard rate and some adjustable shocks and you'd be happy.
#17
Honda-Tech Member
Re: (slow f23)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slow f23 »</TD></TR><TR><TD CLASS="quote">everyone should join 6thgenaccord.com</TD></TR></TABLE>
2nd, great site and great people and LOTS of info for our cars.
2nd, great site and great people and LOTS of info for our cars.
#21
Honda-Tech Member
Thread Starter
Re: (Sketch o5)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sketch o5 »</TD></TR><TR><TD CLASS="quote">doctor_x on v6p sells them.</TD></TR></TABLE>LOL i was all oh shiiit, no way someone beat me to it, but at least not on HT
so i guess you want a number or what?
so i guess you want a number or what?