BUILT NOT BOUGHT!
02-12-2011, 11:13 PM
#2902
Honda-Tech Member
Thread Starter
Join Date: Sep 2007
Location: Shark city. 408
Posts: 1,848
Likes: 0
Received 0 Likes
on
0 Posts
Re: BUILT NOT BOUGHT!
Hey what's up everyone I haven't been on ina couple of days been busy at work. Welcome to the new peeps on the thread. Hey has anyone ever use "seafoam" to clean out their engine? is it worth it? I am thinking about using it to clean up the inside of my engine and maybe get a little better response.
I ended up making this hanger today to help hold the pipe up, the pipe sits on the flat part and the U bolt just keeps it from sliding around, I have to change a little of the heat shield sheet metal before it will fit.
I was having a problem with the system not lining up, it seems the problem was, when i made the system, one of the bends was off just a little,it fits fine under the car, but the bend was right where the rear hanger was, I thought I had moved the hanger out far enough, but apparently it was pulling the piping too far to one side, and causing the entire system to pivot off center.
I was having a problem with the system not lining up, it seems the problem was, when i made the system, one of the bends was off just a little,it fits fine under the car, but the bend was right where the rear hanger was, I thought I had moved the hanger out far enough, but apparently it was pulling the piping too far to one side, and causing the entire system to pivot off center.
x2! Daytona USA all day!
was just going to say the samething!
How is everyone else doing?
as for me, my uncle just installed my alarm for me. viper 350 plus. he also found out the the reason my door lock doesnt work is because one of the wire was short somewhere and wasnt getting power. he ran an external wire and now all the locks are working perfect!
also tonight my brother and Ithrew on some coilovers onto the DB and lowered it some. looks a lot better now. My brother and cousin are going to take the car to the muffler shop tomorrow and get a new flanged welded on for the headers to the cat.
i figure even though i dont own the DB any more but sinces it being in my brother hands now i can still keep you guys updated on the car.
02-12-2011, 11:54 PM
#2903
Honda-Tech Member
Join Date: Mar 2005
Posts: 1,631
Likes: 0
Received 0 Likes
on
0 Posts
Re: BUILT NOT BOUGHT!
http://www.youtube.com/watch?v=mdaow...nofeather=True
messin around 3rd gear vs my friends modded srt4 5th gear
messin around 3rd gear vs my friends modded srt4 5th gear
02-13-2011, 07:55 AM
#2905
Honda-Tech Member
Join Date: Dec 2007
Location: From the 408 but now in 775
Posts: 1,065
Likes: 0
Received 1 Like
on
1 Post
Re: BUILT NOT BOUGHT!
91sedan_kid/ no clips of the meet cause it was only a chill that lasted about an hour. But we are planing out our next integra run,so ill take some clips of that when we have it.
02-13-2011, 08:49 AM
#2909
Honda-Tech Member
Join Date: Mar 2005
Posts: 1,631
Likes: 0
Received 0 Likes
on
0 Posts
Re: BUILT NOT BOUGHT!
D16y7 with y8 intake manifold intake exhaust , srt has bigger fmic with piping intake down pipe and 3" exhaust his car pulls hard when he down shifts but yea still fun race it was on San mateo bridge
02-13-2011, 09:45 AM
#2912
longest project ever
Join Date: Sep 2009
Location: on the south side of dixie, 1986 Accord Hatch
Posts: 3,494
Likes: 0
Received 2 Likes
on
2 Posts
Re: BUILT NOT BOUGHT!
i went out to work on the exhaust stuff and the garage floor is still freezing, got something done though
02-13-2011, 10:01 AM
#2915
Honda-Tech Member
Join Date: Oct 2006
Location: Across the Bay,CA
Posts: 2,655
Likes: 0
Received 0 Likes
on
0 Posts
Re: BUILT NOT BOUGHT!
update on the lexo
did suspension last night. starting shaving the rear fenders, but didnt have the right disc, went through about 10 disc and only cut 7 inches off.. gotta try again today.
getting work vs-xx today running 25mm spacers in the rear,
and maybe 15mm in the fronts when i get some extra money.
did suspension last night. starting shaving the rear fenders, but didnt have the right disc, went through about 10 disc and only cut 7 inches off.. gotta try again today.
getting work vs-xx today
running 25mm spacers in the rear,and maybe 15mm in the fronts when i get some extra money.
02-13-2011, 01:14 PM
#2916
Honda-Tech Member
Re: BUILT NOT BOUGHT!
i so jealous. i was suppose to get an is300 or gs300..then i bought a damn wagon lol!
i hate people who drives with high beams on. i have a wink mirror in my car and clear windows. blinds the *** out of me. also people who has anything over 8k hid. normally anything after 6k is useless..
i hate people who drives with high beams on. i have a wink mirror in my car and clear windows. blinds the *** out of me. also people who has anything over 8k hid. normally anything after 6k is useless..
02-13-2011, 01:35 PM
#2918
GDD Black Reject
Re: BUILT NOT BOUGHT!
i so jealous. i was suppose to get an is300 or gs300..then i bought a damn wagon lol!
i hate people who drives with high beams on. i have a wink mirror in my car and clear windows. blinds the *** out of me. also people who has anything over 8k hid. normally anything after 6k is useless..
i hate people who drives with high beams on. i have a wink mirror in my car and clear windows. blinds the *** out of me. also people who has anything over 8k hid. normally anything after 6k is useless..
02-13-2011, 01:42 PM
#2919
Honda-Tech Member
Join Date: Sep 2010
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
02-13-2011, 01:46 PM
#2920
GDD Black Reject
02-13-2011, 02:18 PM
#2921
Honda-Tech Member
Join Date: Sep 2010
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
02-13-2011, 06:27 PM
#2924
Honda-Tech Member
Join Date: Aug 2009
Location: Rhode Island
Posts: 7,671
Likes: 0
Received 0 Likes
on
0 Posts