Go Back   Honda-Tech > Community Forums > General Discussion and Debate
Sign in using an external account
Register Forgot Password?
Search


Reply
 
 
 
 
LinkBack Thread Tools Search this Thread
Old 04-13-2010, 09:16 AM   #1
Member
 
GoLowDrew's Avatar
 
Join Date: Dec 1999
Posts: 39,359
iTrader Rating: (0)
Default Drill a hole in your muffler - exhaust experts

http://www.thunderracing.com/catalog...installZ06.pdf

Look at page 4. There is a drain hole in the aftermarket exhaust. Many OEM exhaust (GM-Chrysler) system also have a small hole. It suppose to prolong the life of the muffler.

I never seen it on a Honda OEM muffler. Or on a WS2, Magnaflow, or OBX muffler/exhaust systems.

The by-product of the cat for clean air is water. Water sitting in your muffler can will rot out over time.

Is it a good idea to drill a hole?
GoLowDrew is offline   Reply With Quote
Old 04-13-2010, 09:20 AM   #2
at the jetties fishin'
 
stackz's Avatar
 
Join Date: Aug 2002
Location: james island, sc
Posts: 3,590
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

yay, intentional exhaust leaks!

meh, it'll probably get a layer of carbon/water goo built up over it in a little time and clog up anyway resulting in the muffler still rotting apart.

__________________
It is the soldier, not the reporter, who has given us the freedom of press.
It is the soldier, not the poet, who has given us the freedom of speech.
It is the soldier who salutes the flag, who serves beneath the flag, and whose coffin is draped by the flag, who allows the protestors to burn the flag.
If you can read this, thank a teacher.
If you are reading it in english, thank a VETERAN.
stackz is offline   Reply With Quote
Old 04-13-2010, 09:25 AM   #3
Unceasing Measure
 
Archidictus's Avatar
 
Join Date: Feb 2002
Location: Columbus Ohio
Posts: 13,083
iTrader Rating: (0)
https://www.facebook.com/michael.gould.355
Send a message via AIM to Archidictus
Default Re: Drill a hole in your muffler - exhaust experts

I'll just pay $50 for a new muffler when it's time, thanks. No drilling holes in my muffler.
__________________
But now the summer's dreams are bent like grain against the scythe, and memories of blissful days, they fall like leaves.
Archidictus is offline   Reply With Quote
Old 04-13-2010, 09:25 AM   #4
Batpool
 
SilentEdge's Avatar
 
Join Date: Aug 2006
Location: Orange County, CA
Posts: 6,425
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

No. The exhaust is hot enough that the water burns out as steam. The amount that stays in is negligible at best and is almost always burned out by the heat.

Whole exhaust > exhaust hole.
__________________
ISK #A+
DEATH SQUAD
Quote:
Originally Posted by George Knighton View Post
I hate you.
I pray that power be not in my words, but in truth that supersedes the mind of man, and our dead hope, and our blind faith in means that look to justify the ends.
SilentEdge is offline   Reply With Quote
Old 04-13-2010, 09:27 AM   #5
Drunk Wagon Pilot
 
Pinja's Avatar
 
Join Date: Feb 2006
Location: Alexandria, VA/Washington D.C.
Posts: 1,059
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

I just run open header
__________________
Quote:
Originally Posted by ***$nyper View Post
***** rule, hence why I love my mom.
Quote:
Originally Posted by kidcool1977 View Post
From what I understand an escort caters to your needs, where as a prostitute is like a blow up doll you ejaculate in, and tell her to get the **** out.
Pinja is offline   Reply With Quote
Old 04-13-2010, 09:28 AM   #6
H-T Poker champion
 
Hatchy-Ownzjo0's Avatar
 
Join Date: Apr 2002
Location: Columbus Ohio
Posts: 5,920
iTrader Rating: (0)
Send a message via AIM to Hatchy-Ownzjo0
Default Re: Drill a hole in your muffler - exhaust experts

I don't have a muffler on my car..
__________________
I'm a shark! I'm a shaaaaaaark!! Suck my diiiiiiiick! I'm a shaaark!

More like BRZ-OwnzJo0, amirite!?
Hatchy-Ownzjo0 is offline   Reply With Quote
Old 04-13-2010, 09:42 AM   #7
Member
 
GoLowDrew's Avatar
 
Join Date: Dec 1999
Posts: 39,359
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by SilentEdge View Post
No. The exhaust is hot enough that the water burns out as steam. The amount that stays in is negligible at best and is almost always burned out by the heat.
That is true. And that's (one of the reasons) why short trips are "bad" for a car.

However, just yesterday there was a chem spill (http://www.kgun9.com/Global/story.asp?S=12297868), and several PI Crown Vics were blocking the road. When it was clear to go, the CVs (with it's engine ideling for hours?) starting to move in front of me as I got there.

There were almost a few cups of water coming out of the pipes. So it made me think.
GoLowDrew is offline   Reply With Quote
Old 04-13-2010, 09:44 AM   #8
Honda-Tech Member
 
Mrs 5th's Avatar
 
Join Date: Aug 2008
Location: Spartanburg, SC, USA
Posts: 664
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by Pinja View Post
I just run open header
iLol'd
Mrs 5th is offline   Reply With Quote
Old 04-13-2010, 09:45 AM   #9
rookn00b
 
xtrac1's Avatar
 
Join Date: Mar 2004
Posts: 5,554
iTrader Rating: (2)
Default Re: Drill a hole in your muffler - exhaust experts

My exhaust already has a hole.

Wait, muffler?
xtrac1 is offline   Reply With Quote
Old 04-13-2010, 09:46 AM   #10
Risky Business
 
BauleyCivic's Avatar
 
Join Date: Jul 2002
Location: Free SIRIUS
Posts: 23,586
iTrader Rating: (0)
BauleyCivic
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by Pinja View Post
I just run open header
You must not live within a mile of anyone.
BauleyCivic is offline   Reply With Quote
Old 04-13-2010, 09:48 AM   #11
Honda-Tech Member
 
Mrs 5th's Avatar
 
Join Date: Aug 2008
Location: Spartanburg, SC, USA
Posts: 664
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by xtrac1 View Post
My exhaust already has a hole.

Wait, muffler?
Click the image to open in full size.
Mrs 5th is offline   Reply With Quote
Old 04-13-2010, 09:49 AM   #12
Honda-Tech Member
 
Pat McGroin's Avatar
 
Join Date: Jan 2002
Location: Inside Cathy, Florida
Posts: 3,023
iTrader Rating: (0)
LS6 RX7
Send a message via AIM to Pat McGroin
Default Re: Drill a hole in your muffler - exhaust experts

This is already a popular mod amongst honda wagovan owners or any hondas with the transverse muffler and there have been pictures of a ton of water just draining out.
__________________
www.norotors.com
1990 Mazda RX-7
1991 Honda Civic Wagon RT4WD - SOLD
Pat McGroin is offline   Reply With Quote
Old 04-13-2010, 10:21 AM   #13
Daisy... Daisy...
 
Dogginator's Avatar
 
Join Date: Jun 2004
Location: 24601
Posts: 16,586
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by GoLowDrew View Post
http://www.thunderracing.com/catalog...installZ06.pdf

Look at page 4. There is a drain hole in the aftermarket exhaust. Many OEM exhaust (GM-Chrysler) system also have a small hole. It suppose to prolong the life of the muffler.

I never seen it on a Honda OEM muffler. Or on a WS2, Magnaflow, or OBX muffler/exhaust systems.

The by-product of the cat for clean air is water. Water sitting in your muffler can will rot out over time.

Is it a good idea to drill a hole?
If the muffler is made out of steel, a hole drilled afterwards will serve as a breach in the corrosion pretection, which will serve as a nucleation point for corrosion. A factory drilled hole should have corrosion protection on it.

The condensation problem is the worst in winter, especially when a car is driven on short trips. If the exhaust is fully warmed and the car is occasionally driven hard, the condensed water should blow out of the muffler.

Is this about the van?
__________________
404: Care not found.
Dogginator is offline   Reply With Quote
Old 04-13-2010, 10:25 AM   #14
Honda-Tech Member
 
PatrickGSR94's Avatar
 
Join Date: Jan 2002
Location: Nowhere and Everywhere
Posts: 29,088
iTrader Rating: (1)
Send a message via AIM to PatrickGSR94
Default Re: Drill a hole in your muffler - exhaust experts

No hole in my muffler.

<-- original stock 16-yr old muffler GS-R, still rust free! Most of the piping under the car is original, too.
__________________
Please do not PM me with technical questions. Create a thread in the appropriate forum.

H-T OG member #8927 class of '02 ● Koni + GC InstallHID retrofit club
member #0001
PatrickGSR94 is offline   Reply With Quote
Old 04-13-2010, 10:25 AM   #15
GDD Member
 
slomofo's Avatar
 
Join Date: Jun 2002
Posts: 4,703
iTrader Rating: (1)
solbrothers xtrac1 George Knighton ILcrxsi1 uncle_ben markspan6243
Send a message via ICQ to slomofo Send a message via AIM to slomofo Send a message via MSN to slomofo Send a message via Yahoo to slomofo Send a message via Skype™ to slomofo
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by SilentEdge View Post
No. The exhaust is hot enough that the water burns out as steam.

Depends where the water is. It may be steam before the cat where the temperature is hottest, but once it's inside the muffler baffles, it goes back to liquid form if the exhaust isn't hot enough.
__________________
I was wrong, RonJ@HT DIDN'T delete my signature, I'm so sorry Ron.
RonJ@HT is my hero.
I love you captain Ron!
slomofo is offline   Reply With Quote
Old 04-13-2010, 10:34 AM   #16
Screw you guys, I'm... going... home.
 
tjbizzo's Avatar
 
Join Date: Sep 2003
Location: lovely Raleigh, NC
Posts: 2,889
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by GoLowDrew View Post
The by-product of the cat for clean air is water. Water sitting in your muffler can will rot out over time.

Is it a good idea to drill a hole?
Um, no, it isn't a by-product of the cat, it's a by-product of the combustion of hydrocarbons. ALL hydrocarbons do this when burned, which is why modern high-efficiency furnaces, boilers, and water heaters are called "condensing" units. Just sayin'
tjbizzo is offline   Reply With Quote
Old 04-13-2010, 10:39 AM   #17
Honda-Tech Member
 
PatrickGSR94's Avatar
 
Join Date: Jan 2002
Location: Nowhere and Everywhere
Posts: 29,088
iTrader Rating: (1)
Send a message via AIM to PatrickGSR94
Default Re: Drill a hole in your muffler - exhaust experts

uhhh condensing units produce water because of the refrigerant pipes passing through a heat exchanger, which causes the moisture in the air around it to condense into liquid form. It has nothing to do with combustion. In fact, condensing units on split HVAC systems do not involve combustion of any kind. This is what the little tube is for underneath your engine that drips water after driving with the A/C on.

I work in an architecture office and work closely with mechanical engineers and see buildings being built every day, and I have NEVER heard a furnace, boiler, or water heater referred to as a "condensing" unit.
__________________
Please do not PM me with technical questions. Create a thread in the appropriate forum.

H-T OG member #8927 class of '02 ● Koni + GC InstallHID retrofit club
member #0001
PatrickGSR94 is offline   Reply With Quote
Old 04-13-2010, 10:44 AM   #18
Member
 
GoLowDrew's Avatar
 
Join Date: Dec 1999
Posts: 39,359
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by Dogginator View Post
Is this about the van?
Just tossing out ideas for the Accord.
GoLowDrew is offline   Reply With Quote
Old 04-13-2010, 10:50 AM   #19
Honda-Tech Member
 
Dunc's Avatar
 
Join Date: Jan 2005
Location: Cincinnati, OH
Posts: 3,153
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

My OEM catalytic converter on my motorcycle has a small hole in the bottom of it for this purpose. I trust the engineers of that company.
__________________
'12 Yamaha WR450
'02 Jeep Grand Cherokee
'97 LS-GSR/VTEC Turbo
Dunc is offline   Reply With Quote
Old 04-13-2010, 10:51 AM   #20
Daisy... Daisy...
 
Dogginator's Avatar
 
Join Date: Jun 2004
Location: 24601
Posts: 16,586
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by tjbizzo View Post
Um, no, it isn't a by-product of the cat, it's a by-product of the combustion of hydrocarbons. ALL hydrocarbons do this when burned, which is why modern high-efficiency furnaces, boilers, and water heaters are called "condensing" units. Just sayin'
This is correct. If the gas drops below it's dew point, the water condenses and precipitates as a liquid. The high efficiency furnaces extract enough heat to drop the flue gas below the dew point. A cold exhaust system on a car does the exact same thing.
__________________
404: Care not found.
Dogginator is offline   Reply With Quote
Old 04-13-2010, 11:02 AM   #21
I Deliver
 
EJAYATE's Avatar
 
Join Date: Jun 2004
Posts: 1,036
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by Pat McGroin View Post
This is already a popular mod amongst honda wagovan owners or any hondas with the transverse muffler and there have been pictures of a ton of water just draining out.

I have a wagovan, when I drilled the hole about a quarter gallon came out. It's not like you can hear a tiny hole in the back portion of your muffler. It doesn't sound like a leaky exhaust.
EJAYATE is offline   Reply With Quote
Old 04-13-2010, 11:14 AM   #22
Member
 
GoLowDrew's Avatar
 
Join Date: Dec 1999
Posts: 39,359
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by EJAYATE View Post
I have a wagovan, when I drilled the hole about a quarter gallon came out. It's not like you can hear a tiny hole in the back portion of your muffler. It doesn't sound like a leaky exhaust.
Thinking back, my 88 Civic did have a rust spot on the muffler after only about < 8 years. I always thought maybe I scrape it going over a speed bump, while carry my three 200lbs+ friends in the car.
GoLowDrew is offline   Reply With Quote
Old 04-13-2010, 01:20 PM   #23
Honda-Tech Member
 
stevieteg's Avatar
 
Join Date: Apr 2003
Location: MKE
Posts: 1,467
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by Archidictus View Post
I'll just pay $50 for a new muffler when it's time, thanks. No drilling holes in my muffler.

Every <$100 oem style muffler I have every bought has lasted at most 1 year. I went though 2 before I finally just bought a stainless one, well worth the extra money imo.

The hole drilling makes sense to me though. The stock muffler on my DC rusted from the inside out. It still lasted 12 years but it did finally give out. If I had the fore sight I may have drilled it because as stated before, cheap oem replacements are always garbage and have never lasted for me.
stevieteg is offline   Reply With Quote
Old 04-13-2010, 05:01 PM   #24
Honda-Tech Member
 
y7turbo's Avatar
 
Join Date: Feb 2005
Location: Chicago, IL
Posts: 605
iTrader Rating: (0)
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by PatrickGSR94 View Post
I work in an architecture office and work closely with mechanical engineers and see buildings being built every day, and I have NEVER heard a furnace, boiler, or water heater referred to as a "condensing" unit.
So what exactly do you do there?

Tjbizzo is correct.

Byproduct of combustion is water.

the 90%+ furnaces and boilers are condensing. they use a secondary heat exchanger to bring the combustion gasses below its dew point as stated earlier to extract more heat from the unit.

Maybe his wording was incorrect. Its not actually a "Condensing unit", but a "condensing furnace", or "condensing boiler", or whatever piece of mechanical equipment you're talking about.

Last edited by y7turbo; 04-13-2010 at 05:21 PM.
y7turbo is offline   Reply With Quote
Old 04-13-2010, 05:07 PM   #25
Honda-Tech Member
 
Join Date: Jan 2005
Location: Long Island
Posts: 2,070
iTrader Rating: (1)
Default Re: Drill a hole in your muffler - exhaust experts

Quote:
Originally Posted by PatrickGSR94 View Post
uhhh condensing units produce water because of the refrigerant pipes passing through a heat exchanger, which causes the moisture in the air around it to condense into liquid form. It has nothing to do with combustion. In fact, condensing units on split HVAC systems do not involve combustion of any kind. This is what the little tube is for underneath your engine that drips water after driving with the A/C on.

I work in an architecture office and work closely with mechanical engineers and see buildings being built every day, and I have NEVER heard a furnace, boiler, or water heater referred to as a "condensing" unit.
you are talking about something completely different. noone is talking about hvac but you. everything in this thread is about the combustion process. i would tell people to take it easy on you and not flame you, but you had to start your post with "uhhh", like we are all so stupid and you must take time out of your genius life to explain to us. you should work a little closer to the engineers, or better yet, work a little further, and dont influence their work.

Click the image to open in full size.
TurboEM1 is offline   Reply With Quote
 
 
 
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Am I burning coolant? 4tika4 Honda CRX / EF Civic (1988-1991) 7 03-16-2009 12:18 AM
Need help with installing a Silencer AdRoz Honda Civic/Del Sol (1992 - 2000) 2 02-19-2009 07:32 AM
Muffler Water & Airflow moronic_kaos Honda Accord (1990 - 2002) 3 11-20-2008 01:18 PM
exhaust questions theaznracer Acura Integra 7 04-27-2005 07:12 PM
Good Muffler but Inexpensive steve_s Honda Civic/Del Sol (1992 - 2000) 9 01-19-2003 05:59 PM


Tags
car, clean, danger, drill, drilling, exhaust, good, hole, holes, hondatech, make, muffler, small, sound, supposed, tsx

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Join Honda-Tech.com

All times are GMT -8. The time now is 05:00 AM.



2014 Copyright, InternetBrands Inc.
Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Emails & Contact Details