Last updated: 03-19-2009, 11:46 AM
User's Posts: 880
1989 Civic Sedan DX. Got it bone stock back in the middle of 05. Still had the original tape deck and the original key with the factory manual in the dash compartment
H22 from hmotorsonline.com (best dealer around)
QSD H2B Adapter plate
HCP Mounts
DH-Racing 80mm Tappered throttle body
DH-Racing Top mount intake manifold
RC 550's
DH-Racing head work
Crower 3 cams
Crower valve springs, retainers, and valves
H22 Type S pistons
F22 Crank and rods
All OEM bearings and gaskets
H23 Manual tensioner conversion
AEM Cam Gears
KIDD Header
Arp Head studs
Arp Rod bolts
Cometic head gasket
J1 B16 Trans
Fidanza flywheel
ClutchNet Clutch 6Puck NonSprung Hub
Mishimoto EG Radiator
*In the works*
3.5" Intake with BPI Velocity Stack
ETD Traction bar
Coilovers
Gold Rota Circuit 10's
Hankook Tires
Toyo Proxes up front
p28 ECU
eCtune Pro
Xenocron Datalogging Cable
Moates Ostrich 2.0 Emulator
Moates Burn 1
Moates 2timer
Innovative Lc-1 Db Blue
RyWire Jumper harness
Comments and Messages
All times are GMT -8. The time now is 05:33 AM.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.
