Some welding/fabrication from my shop!
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2011
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Some welding/fabrication from my shop!
First of all I want to say hello to everybody.
This are some custom works that I have done in my shop/garage.
BMW e36 with 3.0 M3 engine turbocharged (550 bhp rwhp)
I have converted the normally aspirated intake manifold for the turbo application.
Then I made an 4'' custom exhaust
Honda CRX D16a3 engine turbocharged
Custom piperun for the intercooler.
Sorry for the phone photos.............I promise tha I will make some with my camera.
This are some custom works that I have done in my shop/garage.
BMW e36 with 3.0 M3 engine turbocharged (550 bhp rwhp)
I have converted the normally aspirated intake manifold for the turbo application.
Then I made an 4'' custom exhaust
Honda CRX D16a3 engine turbocharged
Custom piperun for the intercooler.
Sorry for the phone photos.............I promise tha I will make some with my camera.
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2011
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some welding/fabrication from my shop!
Thanks Jean-seb
Now....since this is a Honda forum.....please enjoy the finished intercooler piping (please note that I will change the clamps...they look like C#RAP)
Now....since this is a Honda forum.....please enjoy the finished intercooler piping (please note that I will change the clamps...they look like C#RAP)
#4
Honda-Tech Member
Thread Starter
Join Date: Feb 2011
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some welding/fabrication from my shop!
Ok so I have finished also the exhaust for the above turbo'd Honda CRX.
This is how it came in the shop:
And this is how it left the shop ( please note that the muffler will be changed because this is only a temporary muffler)
This is how it came in the shop:
And this is how it left the shop ( please note that the muffler will be changed because this is only a temporary muffler)
#6
Honda-Tech Member
Thread Starter
Join Date: Feb 2011
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Working
Re: Some welding/fabrication from my shop!
You are doing awesome. Those tank welds look great. I wish you the best and I am sure we would all love to see more from you.
#12
Honda-Tech Member
Join Date: Mar 2000
Location: Toronto, ON, Canada
Posts: 2,859
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some welding/fabrication from my shop!
#14
Re: Some welding/fabrication from my shop!
Looks good! You're doing great. Only problem is that hanger is gonna rip outta that muffler canister on the turbo crx. Good luck to you though, Your work is lookin great!
#15
Honda-Tech Member
Thread Starter
Join Date: Feb 2011
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some welding/fabrication from my shop!
You see....here, in my country, alot of people have fixed ideas and the motorsport stuff is let's say 50 years behind the US.
#16
Honda-Tech Member
Thread Starter
Join Date: Feb 2011
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
#17
Honda-Tech Member
Join Date: Dec 2009
Location: Midwest
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Re: Some welding/fabrication from my shop!
Damn, your welds make mine look like they were done offroading on an atv!
I just have to note the irony behind a great exhaust combined with such a manifold. It's like putting a B18C5 into a Chevette. I hope that's why it's a 2-pc downpipe, so that can be changed later too. Hopefully it holds up.
I just have to note the irony behind a great exhaust combined with such a manifold. It's like putting a B18C5 into a Chevette. I hope that's why it's a 2-pc downpipe, so that can be changed later too. Hopefully it holds up.
Thread
Thread Starter
Forum
Replies
Last Post
bigTom
Welding / Fabrication
52
02-02-2008 07:28 PM