FS: 1996 Accord EX COupe w/H22 & LSD
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2005
Location: Bozeman, MT, USA
Posts: 1,121
Likes: 0
Received 0 Likes
on
0 Posts
FS: 1996 Accord EX COupe w/H22 & LSD
1996 Honda Accord EX Coupe, 182K on chassis
Sandstone Metallic, Tan/Brown cloth interior
Stanley black housing headlights, Depo corners
Depo OEM foglights
Mugen replica grille
94-95 front lip
94-97 Accord Coupe JDM folding mirrors
Rear sedan door handles (no key holes)
Remote keyless entry w/alarm
1995 H22, 30K on rebuild
Type-S pistons
Generic EBAY CAI w/K&N filter
DC Header w/2.5” collector mod
Magnaflow 2.5” Cat
Full 2.5” exhaust w/18” resonator and Vibrant 2.5” Stealth muffler
Car converted to OBDI
Neptune ECU (Very powerful ECU. Much like Hondata. Allows easy control over ITB’s, launch control, CEL shift light, etc).
M4B4 tranny w/LSD
New Master & Slave cylinder replaced 4K miles ago.
4Bidden shifter w/PSpec shift **** and boot.
Ground Control sleaves
Koni Yellow SP3 shocks
Suspension Techniques rear sway-bar
Neuspeed front strut bar.
Momo Hub with Momo Club III steering wheel
Panosinic CD
MTX 5.25 Components in doors and rear deck
Car is a blast to drive. Motor is super strong. Handles really well for a 10 year old chassis. Car is a ten footer. Looks great up to 10’! Paint is a little tired. Chips on hood, with a few random scrapes here and there. Small dent in front of passenger side tail light. Interior is mostly nice. Could use new carpet, and a good deep cleaning to the seats. NO rear seat belts. You can adjust the mirrors, but I never wired the JDM folding switch. Car does not have P/S, but have the bracket and pump to install it. Just need one line to hook it up. Car needs a new A/C condenser. Original is still installed in the engine bay. ABS light is on. Have not had time to fix it. I believe it is the ABS module, as you can drive for a few minutes before it turns on. Also have ITR front brake calipers with 25T brackets for rotor over hub conversion. Also have new upper chrome window trim for driver’s door, and new bearing assemblies for the front.
I had big plans, but alas…I am going to have to bail. So, somebody, pick this car up and give it the happy ending it deserves!
Car is located in Bozeman, MT. I am more than willing to meet buyer half-way (within reason), or drop off to a reasonable spot if shipped.
$5000, OBO
sethburwash@gmail.com
Sandstone Metallic, Tan/Brown cloth interior
Stanley black housing headlights, Depo corners
Depo OEM foglights
Mugen replica grille
94-95 front lip
94-97 Accord Coupe JDM folding mirrors
Rear sedan door handles (no key holes)
Remote keyless entry w/alarm
1995 H22, 30K on rebuild
Type-S pistons
Generic EBAY CAI w/K&N filter
DC Header w/2.5” collector mod
Magnaflow 2.5” Cat
Full 2.5” exhaust w/18” resonator and Vibrant 2.5” Stealth muffler
Car converted to OBDI
Neptune ECU (Very powerful ECU. Much like Hondata. Allows easy control over ITB’s, launch control, CEL shift light, etc).
M4B4 tranny w/LSD
New Master & Slave cylinder replaced 4K miles ago.
4Bidden shifter w/PSpec shift **** and boot.
Ground Control sleaves
Koni Yellow SP3 shocks
Suspension Techniques rear sway-bar
Neuspeed front strut bar.
Momo Hub with Momo Club III steering wheel
Panosinic CD
MTX 5.25 Components in doors and rear deck
Car is a blast to drive. Motor is super strong. Handles really well for a 10 year old chassis. Car is a ten footer. Looks great up to 10’! Paint is a little tired. Chips on hood, with a few random scrapes here and there. Small dent in front of passenger side tail light. Interior is mostly nice. Could use new carpet, and a good deep cleaning to the seats. NO rear seat belts. You can adjust the mirrors, but I never wired the JDM folding switch. Car does not have P/S, but have the bracket and pump to install it. Just need one line to hook it up. Car needs a new A/C condenser. Original is still installed in the engine bay. ABS light is on. Have not had time to fix it. I believe it is the ABS module, as you can drive for a few minutes before it turns on. Also have ITR front brake calipers with 25T brackets for rotor over hub conversion. Also have new upper chrome window trim for driver’s door, and new bearing assemblies for the front.
I had big plans, but alas…I am going to have to bail. So, somebody, pick this car up and give it the happy ending it deserves!
Car is located in Bozeman, MT. I am more than willing to meet buyer half-way (within reason), or drop off to a reasonable spot if shipped.
$5000, OBO
sethburwash@gmail.com
Trending Topics
#17
Honda-Tech Member
Join Date: Mar 2007
Location: Pittsburgh, Pa, Usa
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: 1996 Accord EX COupe w/H22 & LSD (lamsv)
any trades? I really want an EK but let me know what u think
http://hondamarketplace.com/zerothread?id=2140383
http://hondamarketplace.com/zerothread?id=2140383