CT Captiva Blue AWD EG
09-07-2015, 04:00 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Location: ct
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
Captiva Blue AWD EG
The time has come where im looking to start a new project and selling the awd will give me the funds I need. First off I do not need to sell nor will I accept a low ball so don't waste your time. I purchased the car in late 2012 with a k20a2 swap installed, Car came from the south and has no rust of rot factory quarters but the car has been painted. I fixed and kept the car 100% street car and drove it till fall of 2013 when the awd process began. Here is a link of the Build thread with tons of photos.
https://honda-tech.com/appearance-bu...build-3187587/
Car has a very good running k20a2 engine mainly stock with ARP headstuds, Supertech dual springs, new type s oil pump, new chain guides/tensioner and gaskets/seals. Car made 535Whp on c16 20psi bolted down to a dyna pack dyno. I attended IFO in Lebanon New York a month ago or so and ran a 11.2 @130mph off the trailer, more dial in time i can def see 10.7-10.9 for sure as the car sits right now. Car was built to be a 100% street car, heat, radio, rear seats, working fuel gauge, etc. the only thing not to be DOT complyent is a open downpipe exhaust.
Turbo setup
Sheepey T3 sidewinder
PTE 6262 ball bearing
Turbosmart 60mm gate
PTE intercooler core with custom endtanks
DEI turbo blanket
Drivetain
Clutchmaster stage 5 clutch
CRV transmission/ T case
Type S axles
Karcepts 36mm hubs
wagovan driveshaft/rear end/ rear axles
Custom trailing arms/ rear subframe
Suspension
F&F coilovers
megan racing F&R camber kits/ Rear toe adjuster arms
poly bushings
Ktuned traction bar
Fuel
Custom fuel cell with working fuel gauge
-8 feed -6 return
Bosch 044 pump
Aeromotive Reg
ID1000 injectors
Interior
Integra Type R F&R seats
Ktuned shifter box plate
Ktuned 5th gear lockout
Kpro Version 4 inside PRB ecu
Rpf1 15x8
Toyo R888 tires
The list can go on and on there are many items and spare parts that i have not listed. I built this car for myself not on thing is unfinished or half assed i cannot stress that enough. I would rate the body at a 7 there are small dents and scratched here and there but not a spec of rot with factory quarters!!! i am asking $13,500 OBO for the car, Turn key and GO
the pictures im posting up are a few months old and i will edit them tomorrow with up to date photos if your interested in PURCHASING the car PM me and we will go from there
thanks
John
https://honda-tech.com/appearance-bu...build-3187587/
Car has a very good running k20a2 engine mainly stock with ARP headstuds, Supertech dual springs, new type s oil pump, new chain guides/tensioner and gaskets/seals. Car made 535Whp on c16 20psi bolted down to a dyna pack dyno. I attended IFO in Lebanon New York a month ago or so and ran a 11.2 @130mph off the trailer, more dial in time i can def see 10.7-10.9 for sure as the car sits right now. Car was built to be a 100% street car, heat, radio, rear seats, working fuel gauge, etc. the only thing not to be DOT complyent is a open downpipe exhaust.
Turbo setup
Sheepey T3 sidewinder
PTE 6262 ball bearing
Turbosmart 60mm gate
PTE intercooler core with custom endtanks
DEI turbo blanket
Drivetain
Clutchmaster stage 5 clutch
CRV transmission/ T case
Type S axles
Karcepts 36mm hubs
wagovan driveshaft/rear end/ rear axles
Custom trailing arms/ rear subframe
Suspension
F&F coilovers
megan racing F&R camber kits/ Rear toe adjuster arms
poly bushings
Ktuned traction bar
Fuel
Custom fuel cell with working fuel gauge
-8 feed -6 return
Bosch 044 pump
Aeromotive Reg
ID1000 injectors
Interior
Integra Type R F&R seats
Ktuned shifter box plate
Ktuned 5th gear lockout
Kpro Version 4 inside PRB ecu
Rpf1 15x8
Toyo R888 tires
The list can go on and on there are many items and spare parts that i have not listed. I built this car for myself not on thing is unfinished or half assed i cannot stress that enough. I would rate the body at a 7 there are small dents and scratched here and there but not a spec of rot with factory quarters!!! i am asking $13,500 OBO for the car, Turn key and GO
the pictures im posting up are a few months old and i will edit them tomorrow with up to date photos if your interested in PURCHASING the car PM me and we will go from there
thanks
John
Last edited by 93egboosted; 10-08-2015 at 05:53 PM.
Trending Topics
09-25-2015, 03:10 PM
#19
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Location: ct
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
Re: Captiva Blue AWD EG
Bump
