stock D16y8 bin/rom crome
#1
Thread Starter
Join Date: Feb 2006
Location: Frankln, NH, USA
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
stock D16y8 bin/rom crome
ok so afer searching for a WHILE I cant get my hands on a stock d16y8 rom dump anywhere.
I have heard rumors about one but neven an acutal link or file.
http://www.pgmfi.org/twiki/pub...x.bin
is the best I could do but the timing seems WAY off. at udle d16y8 timing is at 12* on the map its at 21*.
I just want to get stock map and play with it on the dyno. trying to save cash by not spending 1 hour on the dyno to get to the stockish map ya know?
I have heard rumors about one but neven an acutal link or file.
http://www.pgmfi.org/twiki/pub...x.bin
is the best I could do but the timing seems WAY off. at udle d16y8 timing is at 12* on the map its at 21*.
I just want to get stock map and play with it on the dyno. trying to save cash by not spending 1 hour on the dyno to get to the stockish map ya know?
#3
Thread Starter
Join Date: Feb 2006
Location: Frankln, NH, USA
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Jason-)
I fugured it out the timing is actualy right. the reason I though it was wrong is because I was thinking z6 had **** to do with a y8 lol.
basicly the y8 runs the dizzy sligtly off 9.75* so 12+9.75=21.75 which is exactly whats on the map in the idle section.
http://www.pgmfi.org > * when it comes to ECU's lol.
basicly the y8 runs the dizzy sligtly off 9.75* so 12+9.75=21.75 which is exactly whats on the map in the idle section.
http://www.pgmfi.org > * when it comes to ECU's lol.
Thread
Thread Starter
Forum
Replies
Last Post
portenio78
Engine Management and Tuning
4
03-31-2012 05:32 AM