Records

Hey guys, this might be in the wrong section but i didnt know where else to put it. im basically just wondering how spoon n1 exhaust will work with an turbo setup? from the things i've read on google mostly, is that spoon n1 is too restricted for turboes. the spoon n1's sound is just almostly like the perfect sound for hondas (IMO), so is there anyway spoon n1 could actually work with an turbo setup?

What are the thoughts about it?

MR.johnson

try the forced induction area for better answers.

what are your power goals?

FlewByU352

You will be bottle necked for sure assuming most run a 3" downpipe. I was going to try it at one point regardless of the power I made I was keeping it on. But the all motor bug bit me and I was hooked.

Records

Looking for around 250whp +/-
not really much, but if its possible i'll higher the boost, for example when i am going to drag race etc (not always)

Why will i be bottle necked btw? and what are the consequences of running turbo with too less of a flow? (spoon n1) 2.4" +/-

Records

Bump

tegdc4

You could run it with one of those for normal driving and cruising but when you get on it or for track use run an 3" E-cut for better performance.

tegdc4

Running a exhaust with too much restriction will cause a turbo to not be as efficient because a turbo spools off of exhaust flow.

civickiller

Run a 3" full exhaust

running a smaller exhaust will only hurt your optimal power

Records

It'll mostly be an daily drive btw, and streetraces inbetween if i dont like spoon n1 after i've tested it i'll just resell and go 3"
im just afraid it'll be too loud for me ;P