Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Engine and Powertrain
- Honda Accord: How to use Scan Tool
Step by step instructions for do-it-yourself repairs.
Browse all: Engine and Powertrain
obd1 code reader/scan tool
#1
Honda-Tech Member
Thread Starter
obd1 code reader/scan tool
Okay after some frustration I am attempting to search this topic again. I am looking for a code reader or scan tool for my p28. i know about the paperclip which is all fine and dandy,(not for me) and I have also seen the more advanced version of this in the code reader cable adapter which does the exact same thing which is flash the cel or light on ecu.What i would like is a straight answer as to A. Is there a scan tool that will supply me with info the same way that the obd2 scan tools will? and B. if you dont know or if there is no such thing please say so. Or purhaps there is a scanner that doesn't operate in the specific ways that the obd2 ones do but are more informative than the cable adapter or paperclip. I want a reliable scan tool that is obd1 freindly
#2
Honda-Tech Member
Join Date: Apr 2003
Location: 60ft garage, CA, USA
Posts: 5,365
Likes: 0
Received 0 Likes
on
0 Posts
Re: obd1 code reader/scan tool
To be honest, I dont think I've ever checked to see if there's a DLC under the dash on pre 95 obd-1 Hondas, lol. If there's a DLC, then simply use a scan tool that's compatible with obd-1 vehicle. The paperclip method is so easy and fast, it just doesn't seem like one would need any other method. Expanded info for the codes that you pull with the paperclip method are all over the net. You would do the same thing with retrieved obd2 codes, or at least that's what I do if Im not familiar with the vehicle, even though my scanner does give a brief description. Good luck with your search.
#3
Honda-Tech Member
Thread Starter
Re: obd1 code reader/scan tool
Thanks for the info man thats kinda what i was thinking i would try i just need to find an obd1 compatable scanner and the honda adapter, hopefully ill be into what i want sooner than later. Honestly i am being lazy and need to replace some bulbs in my cluster and just pull the codes lol! Thanks again man
#4
Re: obd1 code reader/scan tool
http://www.linkdelight.com/013058-Ho...tor-Cable.html
...I would like to know how this works i plan on purchasing one in a few days hope it pulls more than codes.
...I would like to know how this works i plan on purchasing one in a few days hope it pulls more than codes.
#5
Honda-Tech Member
Join Date: Feb 2002
Location: TwinCities, MN, USA
Posts: 646
Likes: 0
Received 0 Likes
on
0 Posts
Re: obd1 code reader/scan tool
#6
Re: obd1 code reader/scan tool
i do have a obd2 scantool set up on my laptop my question is what kind of information will i be able to pull from the obd1 ecu's(more than codes) or am i better off just doing the paper clip trick
#7
Honda-Tech Member
Join Date: Feb 2002
Location: TwinCities, MN, USA
Posts: 646
Likes: 0
Received 0 Likes
on
0 Posts
Re: obd1 code reader/scan tool
You need the HIM (Honda Interface Module) that I linked to and the Honda software in order to get the type of info that your OBD2 reader displays for your OBD1 honda. With that setup then you can read the instantaneous output of all sensors right from the ECU.
Thread
Thread Starter
Forum
Replies
Last Post