jdm b20b Longblock Intake mani thread stripped how to restore!
11-03-2016, 08:40 PM
#1
jdm b20b Longblock Intake mani thread stripped how to restore!
hi i have a jdm b20b longblock
the intake manifold threading (12mm socket) is stripped
what size is it to tap? 12X1.25?
just to confirm ^
/closed figured it out
the intake manifold threading (12mm socket) is stripped
what size is it to tap? 12X1.25?
just to confirm ^
/closed figured it out
Last edited by KiNGDEE206; 11-07-2016 at 12:11 AM.
11-03-2016, 09:20 PM
#2
Re: jdm b20b Longblock Intake mani thread stripped how to restore!
Need to know thread pitch so I can order a tap and inset kit asap!
need to get this swap on the road!
i googled and came up with few answers
m8x1.25
m10x1.25
m12x1.25
need to get this swap on the road!
i googled and came up with few answers
m8x1.25
m10x1.25
m12x1.25
11-04-2016, 04:08 PM
#3
Re: jdm b20b Longblock Intake mani thread stripped how to restore!
Not sure where the strip is but if you can run a new bolt through the other side of it it could clean up the threads. Again, I'm not sure which part is stripped so if this isn't possible then ignore it.
Thread
Thread Starter
Forum
Replies
Last Post