clutch engaugement issue
#1
Honda-Tech Member
Thread Starter
clutch engaugement issue
The clutch cable I am using is adjusted all the way out and the pedal still doesnt engauge the clutch until its just about fully released. I am wondering if using a different cable might be the solution. I am using a stock 91 civic cable and its a b18c with cable transmission. 6 puck clutch and ACT lightweight flywheel it didnt occur til after the new flyweel was installed. Any ideas or advice is appreciated. thanks
Thread
Thread Starter
Forum
Replies
Last Post
Speed_69
Honda Civic / Del Sol (1992 - 2000)
2
04-21-2006 11:00 AM