Bisimoto Engineering K_series level 3 Cam 40 whp!!!
#1
Bisimoto Engineering K_series level 3 Cam
K20 head, K24 block
Bisimoto spec Arias Shelf Piston
Eagle Rods
Bisimoto Level 3
valvetrain
Custom Intake Manifold
Custom 4-1 Header
Stock Type R 6-speed Tranny
75mm TB
K-Pro
Pump Gas
274.70whp; 206.85ft/lbs
Bisimoto spec Arias Shelf Piston
Eagle Rods
Bisimoto Level 3
valvetrain
Custom Intake Manifold
Custom 4-1 Header
Stock Type R 6-speed Tranny
75mm TB
K-Pro
Pump Gas
274.70whp; 206.85ft/lbs
Last edited by Janet@bisimoto; 10-03-2009 at 09:45 AM.
#2
Honda-Tech Member
Join Date: Oct 2007
Location: Don't worry about it
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
always amazing me. Couldnt think of anyone Id rather go with for my headwork for my boosted D that im building
#4
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
We are great with a single cam. Imagine what we can do with a two cams. In the near future look for more K-Series products from Bisimoto Engineering.
#5
Honda-Tech Member
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
I made that power on a smaller motor with off the shelf parts, where is the 40+ horsepower?
#7
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
Where's your dyno chart? Bisi has the fastest fwd N/A unibody car in the world. What are you racing accomplishments? And he designed and built the car himself.
Last edited by Puma909; 10-01-2009 at 01:27 PM.
Trending Topics
#8
Honda-Tech Member
#11
Honda-Tech Member
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
Jdogg, I am getting a beer, you want one too? maybe popcorn?
#12
Junior Member
Join Date: Feb 2006
Location: Walnut, CA, USA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
#13
Honda-Tech Member
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
#14
Honda-Tech Member
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
i have no doubt that bisi's stuff works good, as does everyone else.
but seriously this thread and 90% of the recent posts by the bisi camp have been absolutely 100% worthless.
wtf does +40hp mean.. +40hp compared to what?
there are lots of 270hp NA k24 dyno graphs out there using way less custom parts than this build
#16
Honda-Tech Member
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
What proof do I need? I am not the only person that has done it. Where is YOUR proof of 40+ horsepower?
Yeah, I think this is going to be long, 6 pack coming your way.
more ***** in mouths..
i have no doubt that bisi's stuff works good, as does everyone else.
but seriously this thread and 90% of the recent posts by the bisi camp have been absolutely 100% worthless.
wtf does +40hp mean.. +40hp compared to what?
there are lots of 270hp NA k24 dyno graphs out there using way less custom parts than this build
i have no doubt that bisi's stuff works good, as does everyone else.
but seriously this thread and 90% of the recent posts by the bisi camp have been absolutely 100% worthless.
wtf does +40hp mean.. +40hp compared to what?
there are lots of 270hp NA k24 dyno graphs out there using way less custom parts than this build
#17
Junior Member
Join Date: Feb 2006
Location: Walnut, CA, USA
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
[QUOTE=Turbogixxer;40148057]Hey, long time no talk, how you been?
What proof do I need? I am not the only person that has done it. Where is YOUR proof of 40+ horsepower?
what?!
What proof do I need? I am not the only person that has done it. Where is YOUR proof of 40+ horsepower?
what?!
#18
Honda-Tech Member
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
Here is a detailed description of what was accomplished utilizing a Bisimoto Camshafts on a K20. This was done outside of our facility. It was done out in the Philippines. https://honda-tech.com/forums/k-series-153/k24-k20-swap-eg-2642836/
Arias OTS Piston
The graph that are not red X are 240 and 269. 269-240 = 29. There the 40+ horsepower?
Originally Posted by evogrl
what?!
#20
Honda-Tech Member
#21
Honda-Tech Member
Join Date: Aug 2008
Location: centennial, co, usa
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
To me it means that there is actually a company out there that does research on to what works and what doesnt work in order to create the most amount of power. How many companies out there realistically do this rather than than go with what is a good idea and make a part that yes does create power but over all does not harness what the engine is actually capable of.
I personally have over 5000$ worth of bisimoto goodies and know from an engineering aspect as an engineer myself that they are worth the money.
Just give bisi or anyone... hedi, robert or any of the "bisi camp" a call and you will be totally surprised at the technical knowledge that all the employees there have. Its not like calling most other companies that have to "go ask somebody in the shop" with any MINOR technical quest.
Bisimoto uses technical and realistic data and engineering to make their products and back it up with STELLAR customer service a combination in my opinion 98% of the sport compact companies dont even come close to.... End Rant
I personally have over 5000$ worth of bisimoto goodies and know from an engineering aspect as an engineer myself that they are worth the money.
Just give bisi or anyone... hedi, robert or any of the "bisi camp" a call and you will be totally surprised at the technical knowledge that all the employees there have. Its not like calling most other companies that have to "go ask somebody in the shop" with any MINOR technical quest.
Bisimoto uses technical and realistic data and engineering to make their products and back it up with STELLAR customer service a combination in my opinion 98% of the sport compact companies dont even come close to.... End Rant
#22
Honda-Tech Member
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
I am not doubting that bisi's stuff works.
I have met bisi and talked with him at length and i agree that he is a great guy and knows his **** (obviously).
what i do not agree with is a post with a single dyno graph from some dude who's job is to spam the internet that says +40hp with no info, no comparison, no nothing.
If i posted that there would 40people in my thread bashing the **** out of me, and i dont make the ****.. i just tune it (and have been for close to 10 years)
I have met bisi and talked with him at length and i agree that he is a great guy and knows his **** (obviously).
what i do not agree with is a post with a single dyno graph from some dude who's job is to spam the internet that says +40hp with no info, no comparison, no nothing.
If i posted that there would 40people in my thread bashing the **** out of me, and i dont make the ****.. i just tune it (and have been for close to 10 years)
#24
Honda-Tech Member
Join Date: Nov 2003
Location: SE, PA, usa
Posts: 1,743
Likes: 0
Received 0 Likes
on
0 Posts
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
This is the second graph Ive seen from bisi's guys that had edited info from the owners own post.
His sales reps are only hurting Bisi's reputation. You can't just say +40HP and not show the +40hp graph. WTF? NOONE gets away with that except for Bisi it seems. Everyone just eats it up and cites his accomplishments with a single cam. That has nothing to do with these bogus graphs that are being posted.
I'm NOT hating on Bisi as I'm sure you guys are going to say. This has nothing to do with him personally.
His sales reps are only hurting Bisi's reputation. You can't just say +40HP and not show the +40hp graph. WTF? NOONE gets away with that except for Bisi it seems. Everyone just eats it up and cites his accomplishments with a single cam. That has nothing to do with these bogus graphs that are being posted.
I'm NOT hating on Bisi as I'm sure you guys are going to say. This has nothing to do with him personally.
#25
Honda-Tech Member
Join Date: Aug 2009
Location: Baton Rouge,Louisiana
Posts: 7,635
Likes: 0
Received 3 Likes
on
3 Posts
Re: Bisimoto Engineering K_series level 3 Cam 40 whp!!!
This is the second graph Ive seen from bisi's guys that had edited info from the owners own post.
His sales reps are only hurting Bisi's reputation. You can't just say +40HP and not show the +40hp graph. WTF? NOONE gets away with that except for Bisi it seems. Everyone just eats it up and cites his accomplishments with a single cam. That has nothing to do with these bogus graphs that are being posted.
I'm NOT hating on Bisi as I'm sure you guys are going to say. This has nothing to do with him personally.
His sales reps are only hurting Bisi's reputation. You can't just say +40HP and not show the +40hp graph. WTF? NOONE gets away with that except for Bisi it seems. Everyone just eats it up and cites his accomplishments with a single cam. That has nothing to do with these bogus graphs that are being posted.
I'm NOT hating on Bisi as I'm sure you guys are going to say. This has nothing to do with him personally.
Aside from rocket being banned and Donf not on here anymore you didn't see them use these tactics either to get business..
shame.. bisi seems like a nice guy..
Wheres the original dyno plot, i wanna see 40whp gains. From a set of cams.. 20, i can believe 40? thats almost equal to bolting on a turbo kit.. for most cars.. I understand the whole factor of the k series responds better.. but seriously.. Lets see the before dyno.