B16 Head Bolts
#1
Thread Starter
Join Date: Jul 2006
Location: east coast
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
B16 Head Bolts
about to torque down a B16 head on a B16 block and i noticed that there are two torque spec.'s, First Step 22 ft-lbs and Second Step 61 ft-lbs
does this mean i torque them all down to 22 ft-lbs in the tightening sequence and then torque them again in the same sequence to 61 ft-lbs?
thanks in advance
does this mean i torque them all down to 22 ft-lbs in the tightening sequence and then torque them again in the same sequence to 61 ft-lbs?
thanks in advance
Thread
Thread Starter
Forum
Replies
Last Post