.::Lee::.

Alright folks, I'll kick this off, but it's time we had an official thread.

If you've got it, want it or are looking to trade something in Utah or nearby vicinity (for our homeboys in Idaho and others) then post it up. This should allow us a venue to buy, sale, and trade without having to pay for shipping.

To start it off: I don't currently have anything for sale unless you are looking for LS heads, in which case i've got a couple sitting in the garage, but I am looking for the following parts for an EG: black left horn button. rear ashtray. undented hood (doesn't matter which color, i'll paint it anyway). front or rear bumper lips.

Also, i'll socket ecu's and can give you a basemap as well if you need. PM me for details.

Boosted Rex

I have 2 near complete LS swaps but I am only selling whichever one I sell first. Comes with your pick of running engine, LS A1 trany (no grinds) and pr4 ecu. Swap will need axles, dizzy and a harness.

The first motor has about 160k runs great, with tranny and ecu - $750 obo

The second one has 7k on rebuild. Main and rod bearings. Timing belt. Oil and water pump. All seals and gaskets. AEM tru time cam gears. All replaced when motor was rebuilt. Motor was broke in correctly. Oil has been changed 5 times already and now has full synethic. Motor and tranny are still in the car so if you want to test drive it let me know. (I can have it out in one night.) Ran 15.0 at RMR last fall. - $1200 obo

I also have a full exhuast for 94+ Integra or you can shorten it for Civic's and CRX's. - $120 obo

If you want pics of engines or want to test drive car post or pm me. (Interested Buyers Only) And just so you know I am up in Logan.


Modified by Boosted Rex at 12:34 AM 4/25/2005


Modified by Boosted Rex at 1:09 PM 4/27/2005

stockredej1

i have a NOS wet kit for sale, it is complete except for a bottle. brand new bottle psi gauge, nozzle and jets, jetted for a 50 shot, fuel pressure gauge, all lines and silenoids. asking $200 for all of it, interested in trades. i need turbo stuff, so if ya got it let me know.

thanks.

BTW lee kicks ***.

veggiemaster

Lee, you are such a cutie.

Anyway, here is what i want.

Turbo Stuff

Tial or knockoff WG, 35/38 mm.
BOV, just something that works well.



Here is stuff I have

ITR Front seats - will only trade for something amazing.
K&N Filter recharger kit - $5
SAFC2 - SOLD
Kill switch setups - $25 , $35 installed
96 civic DX Gauge cluster - 40


ok. peace out. fear the mullet and eat lots of cake.


Modified by veggiemaster at 8:19 PM 4/25/2005


Modified by veggiemaster at 10:38 PM 6/4/2005

bambbrose

iTrader: (1)

https://honda-tech.com/zerothread?id=1225218


12" sub with box. BUY eet.

Also have an eg hatch rear glass for sale of $10 to a local person

civic_hatchy

Stuff in my Garage:

Pm me for some prices All For sale
-password jdm front upper strut bar Fits eg, ek, da (2 Point)
-red lowering springs 1 1/4 Drop (unknown brand) came off my 94 hatchback(sold)
-Autometer sport comp 10,000 rpm tach (with all hardware and wires (sold)
-Rear floor mats (black)
-oem spark plug wires with cap (p30)
-Inner tail lights L&R for 92-95 hatch (ones on the tail gate)
-Gran turismo gt steering wheel 600 degree rotation (the real one)
-Front headlights for 92-95 honda (with halos) think they are projector
-94 civic cx gauge cluster with indiglo gauges
-crx front lip (scraped up on the bottem)
-rear cargo cover for 92-95 hatchback (holes cut for 6x9's)
-Altezza tail lights for 92-95 civic hatchback (all 4 pieces)
-b16a2 stock flywheel (needs to be resurfaced)
-p28 ecu (NO chip)
I have pictures if you want to see them

also i want a eg clock (one thats about the hazard button)

Modified by civic_hatchy at 5:08 PM 4/25/2005


Modified by civic_hatchy at 5:14 PM 4/25/2005


Modified by civic_hatchy at 6:56 PM 4/25/2005


Modified by civic_hatchy at 7:52 PM 4/28/2005


Modified by civic_hatchy at 7:53 PM 4/28/2005


Modified by civic_hatchy at 6:38 PM 5/3/2005

RDSDC2

MY YOKO AVS ES100 TIRES!!!

8 pages and still not sold

https://honda-tech.com/zerothread?id=1147125

DohcVtecCrx

I got:
pr4 ecu
pm6 ecu
pm5 ecu
zc ecu
93 gs-r ac
da radiator
and piles of misc stuff pm me if interested I just posting to keep this in my watched topics

my_slow_civic

I have a set of 205/50/15 Falken Azenis on GSR wheels for sale.

https://honda-tech.com/zerothread?id=1210275

veggiemaster

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by my_slow_civic &raquo;</TD></TR><TR><TD CLASS="quote">I have a set of 205/50/15 Falken Azenis on GSR wheels for sale.

https://honda-tech.com/zerothread?id=1210275</TD></TR></TABLE>
how much did you want for them dude? i might be interested.

my_slow_civic

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by veggiemaster &raquo;</TD></TR><TR><TD CLASS="quote">
how much did you want for them dude? i might be interested.</TD></TR></TABLE>

$250, OBO

Boosted Rex

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Rex &raquo;</TD></TR><TR><TD CLASS="quote">I have 2 near complete LS swaps but I am only selling whichever one I sell first. Comes with your pick of running engine, LS A1 trany (no grinds) and pr4 ecu. Swap will need axles, dizzy and a harness.

The first motor has about 160k runs great, with tranny and ecu - $1000 obo

The second one has 7k on rebuild. Main and rod bearings. Timing belt. Oil and water pump. All seals and gaskets. AEM tru time cam gears. All replaced when motor was rebuilt. Motor was broke in correctly. Oil has been changed 5 times already and now has full synethic. Motor and tranny are still in the car so if you want to test drive it let me know. (I can have it out in one night.) Ran 15.0 at RMR last fall. - $1400 obo

I also have a full exhuast for 94+ Integra or you can shorten it for Civic's and CRX's. - $120 obo

If you want pics of engines or want to test drive car post or pm me. (Interested Buyers Only) And just so you know I am up in Logan.

</TD></TR></TABLE>

I needed the header and alt so I have decided to <U>drop the prices</U>

$750

Or

$1200

killer6993

Well... this is convenient

I'm looking for a swap. Complete Swap, not set on anything just looking for a good deal. Also looking for Exhaust for 93 EG CX Hatch. And header for d15b7 (or any d I guess)

To sell -
I have a spare d15b7 block - dunno if anything is wrong, never took the time to look.

d15 head - Everything is in good condition, might need milled though.

EX Gauge Cluster for EG.

Willing to part anything on the block or head, but you do the work.

IF anyone has any good EG parts for sale I'm always interested. Seriously, anything!

my_slow_civic

WTB: 99/00 Civic passenger side headlight
Front and rear bumper
Passenger side fender

utahbmx

I have a ton of EK interior parts from a 2000 si, including the dash and seats, also I still have a lot of interior part form my brothers Del Sol he smashed, IM me for anything.

Also I'm looking for a dual stage boost controller (turbo xs) and some 550 or bigger injecters.

.::Lee::.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by killer6993 &raquo;</TD></TR><TR><TD CLASS="quote">
To sell -
I have a spare d15b7 block - dunno if anything is wrong, never took the time to look.
</TD></TR></TABLE>

Which motor is the B7? Is that the DX? I may be interested.

.::Lee::.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DohcVtecCrx &raquo;</TD></TR><TR><TD CLASS="quote">I got:
pr4 ecu
pm6 ecu
pm5 ecu
zc ecu
93 gs-r ac
da radiator
and piles of misc stuff pm me if interested I just posting to keep this in my watched topics </TD></TR></TABLE>

What would you want for all three ecu's? Also, is your PR4 OBD0 or OBD1?

Boosted Rex

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ibiza &raquo;</TD></TR><TR><TD CLASS="quote">

What would you want for all three ecu's? Also, is your PR4 OBD0 or OBD1?</TD></TR></TABLE>

I'm getting the pr4 from him but he still has 1-pm6 2-pm5 and one ZC ecu. I'm pretty sure if you offered him a hundred bucks you could take them all. And the pr4 is obd-0.

bambbrose

iTrader: (1)

OK I've got an EG rear hatch glass with wiper motor assembly for FREE. Just come pick it up at my house and it's yours. I'm in Logan til next friday, and then I move down to cedar city. I don't wanna pack this up and move it so I need to get rid of it

killer6993

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ibiza &raquo;</TD></TR><TR><TD CLASS="quote">Which motor is the B7? Is that the DX? I may be interested.</TD></TR></TABLE>

It's the DX/CX motor. Not sure if it's been in anything else.

stockredej1

i have a brand new 40 mm HKS copy wastegate. it comes with 6 extra springs. and some flanges. i want to trade it for a 35-38mm wastegate because this wastegate is to big for my setup. or i will sell it for 150 plus shipping.
thanks.

my_slow_civic

I am in need of a steering column. Just this piece shown here:


When the dipshits busted my steering column, the bent it pretty good. You can definatly feel the bend, when you turn the wheel. If anyone has a wrecked EK, and they dont need that piece, let me know.

.::Lee::.

I have a D series obx turbo mani for sale for $125. Brand new, unused. This is the newer style that comes braced and is made out of the thicker steel.

This would make a great starter manifold, and well, is dirt cheap.

DohcVtecCrx

PR3 ecu
b16a obd-0 distrib
best offer need some cash for the project car.

stockredej1

that nitrous kit i have i will go $150 on it if anyone local wants it. let me know.