Rear Trailing Arm Bushing Extractor Tool
#1
Honda-Tech Member
Thread Starter
Rear Trailing Arm Bushing Extractor Tool
SALE IS LIMITED TO EAST COAST DUE TO PEACE TREATY. If you are on the West Coast, shop here --> https://honda-tech.com/zerothread?id=1863775
Asking Price --> <FONT SIZE="3">Sold</FONT>
Asking Price --> <FONT SIZE="3">Sold</FONT>
Asking Price --> <FONT SIZE="3">Sold</FONT>
Bushing Extractor for Honda & Acura
Removal and Installation Tool
# Easily and quickly remove and install trailing arm bushings in 15 minutes per side versus the factory “book” time of 1.8 hours per side.
# No removing the trailing arm from the vehicle and using a hydraulic press.
# No need to disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines and emergency brake cables.
Works on: Honda; Civic 1988-2000, CRX 1988-1991, Del Sol 1993-1997 Acura; Integra 1994-2001 PATENT PENDING
Refer to factory specifications for proper bushing installation depth.
Schley 65100
Item 2784
<FONT SIZE="3">Never Used</FONT>
Asking Price --> <FONT SIZE="3">140$ SHIPPED</FONT>
Location --> South Florida
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .:Baker:. »</TD></TR><TR><TD CLASS="quote">great tool, perfect price. Good luck selling bud</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Red Zone **** ej1 »</TD></TR><TR><TD CLASS="quote">bump for this tool. better then paying someone at the shop to press it out </TD></TR></TABLE>
Modified by dr_latino999 at 10:30 PM 1/24/2007
Asking Price --> <FONT SIZE="3">Sold</FONT>
Asking Price --> <FONT SIZE="3">Sold</FONT>
Asking Price --> <FONT SIZE="3">Sold</FONT>
Bushing Extractor for Honda & Acura
Removal and Installation Tool
# Easily and quickly remove and install trailing arm bushings in 15 minutes per side versus the factory “book” time of 1.8 hours per side.
# No removing the trailing arm from the vehicle and using a hydraulic press.
# No need to disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines and emergency brake cables.
Works on: Honda; Civic 1988-2000, CRX 1988-1991, Del Sol 1993-1997 Acura; Integra 1994-2001 PATENT PENDING
Refer to factory specifications for proper bushing installation depth.
Schley 65100
Item 2784
<FONT SIZE="3">Never Used</FONT>
Asking Price --> <FONT SIZE="3">140$ SHIPPED</FONT>
Location --> South Florida
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .:Baker:. »</TD></TR><TR><TD CLASS="quote">great tool, perfect price. Good luck selling bud</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Red Zone **** ej1 »</TD></TR><TR><TD CLASS="quote">bump for this tool. better then paying someone at the shop to press it out </TD></TR></TABLE>
Modified by dr_latino999 at 10:30 PM 1/24/2007
Trending Topics
#24
Honda-Tech Member
Thread Starter
Re: Rear Trailing Arm Bushing Extractor Tool (Red Zone **** ej1)
Did you use it upside down? It is directional and I made the mistake of failing to adhere to the instructions and used my first in the wrong orientation; within minutes there was too much force on the side leg and at the hole where the steel cable was at KAPOOF! Lesson learned - follow the damn directions.