H24 Engine Setup!
#1
Honda-Tech Member
Thread Starter
H24 Engine Setup!
Up for sale is my full H24 engine setup. I am not going to part this out. I was going to build this for my accord, but I sold the car and do not need these parts anymore. It includes a 90mm bored and darton sleeved block. The block has not been used at all since the sleeving. Needs to be rehoned when assembled. There is also a small dent on the very outside corner, pictured below, which is completely outside of the headgasket area. A H23 crank, which is in great condition and will be perfect once it gets a polish at a machine shop. Arias 90mm 11:1 pistons. They include wrist pins, but not rings. Rings can be bought from arias with the part number on the very bottom of the piston. The pistons are BNIB. I am also going to throw in a completely bare H22 head that was built with racing valves and springs, but those were sold. New owner just needs H22 rods and this will be a H22 2.4L setup! I am asking $1500 plus shipping.
H22 block
The dent:
H23 crank
Arias Pistons
Bare H22 Head
H22 block
The dent:
H23 crank
Arias Pistons
Bare H22 Head
Thread
Thread Starter
Forum
Replies
Last Post
ThE PiMpiN Co
Honda Prelude
7
09-16-2005 09:00 AM